Skip to content

Wayne County Fire and EMS Frequencies

Wayne County in Indiana has 7 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 45 cities and communities below for local fire departments and EMS agencies.

About Wayne County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wayne County: Wayne County Fire 154.0100 MHz, narrow FM, 151.4 PL (backup). EMS dispatch for Wayne County: Culberson Ambulance Service 155.2350 MHz, narrow FM, 114.8 PL; Indiana University Health Life Line 153.1850 MHz, narrow FM, 173.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Wayne County Fire talkgroup 11024 (hex 2b10).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Wayne County, start with the Dalton site of Indiana Project Hoosier SAFE-T. Its control channels: 852.9, 853.3875 MHz.

Data updated .

Wayne County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County Fire BackupWayne County Fire – Dispatch154.0100151.4 PLFMNWPCB426

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wayne County FireWayne County Fire – Tactical Channel154.2350FMN—
Wayne County FireWayne County Fire – Tactical Channel154.2650CSQFMNWPCB426
Wayne County FireWayne County Fire – Tactical Channel154.2800FMN—
Wayne County FireWayne County Fire – Tactical Channel154.2950CSQFMNWPCB426

EMS Dispatch

EMS Dispatch frequencies for Wayne County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Culberson Ambulance ServiceCulberson Ambulance Service – Dispatch155.2350
In 153.6200
114.8 PLFMNKNAZ321
Indiana University Health Life LineIndiana University Health Life Line – Dispatch153.1850173.8 PLFMNWQVB765

Wayne County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Wayne County FireCounty Fire/Reid EMS – Paging (only)110242b10D
Wayne County FireCounty Fire/Reid EMS – Dispatch124373095D
Wayne County FireWayne County Fire – Fire Ground (County)124383096D
Wayne County FireWayne County Fire – Fire Ground (County)124393097D

Radio system sites in Wayne County

Program the control channel first; your scanner finds the voice channels from it.

Dalton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 31 (hex 1F) · NAC 6B1
Control 852.9, 853.3875
Voice 851.3875, 851.825, 852.4125
Fountain City · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 59 (hex 3B) · NAC 6B9
Control 854.4875, 854.7375, 856.0625, 858.9375
Voice 854.2875
Centerville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 60 (hex 3C) · NAC 6BA
Control 771.86875, 772.49375, 772.74375, 774.21875
Voice 771.09375
Richmond · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 71 (hex 47) · NAC 6B1
Control 852.9375, 853.1125
Voice 851.2875, 851.55, 852.25
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wayne County

Common questions

What frequency does the fire department use in Wayne County?

Fire dispatch channels listed for Wayne County: Wayne County Fire 154.0100 MHz, narrow FM, 151.4 PL (backup).

What frequency does EMS or the ambulance service use in Wayne County?

EMS dispatch channels listed for Wayne County: Culberson Ambulance Service 155.2350 MHz, narrow FM, 114.8 PL; Indiana University Health Life Line 153.1850 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Wayne County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Wayne County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Wayne County?

For Wayne County, start with the Dalton site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9, 853.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wayne County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Wayne County are marked encrypted.

Are Wayne County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Wayne County are marked encrypted.