Skip to content

Fairview Fire and EMS Frequencies

We do not have frequencies listed specifically for Fairview in Washington County, Indiana yet. Countywide channels for Washington County that may also cover this area are shown below when we have them.

About Fairview Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fairview: Washington County Fire 155.4900 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Fairview: Washington County EMS 155.9025 MHz, NXDN48, RAN 22. Trunked: Indiana Project Hoosier SAFE-T, for example Washington County Fire talkgroup 21694 (hex 54be).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Washington County channels that also cover Fairview

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Repeater155.4900
In 153.9950
167.9 PLFMNWQF450

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Posey Twp151.2725
In 159.3225
FMNWQFB901
Washington County FireWashington County Fire – Tactical Channel153.9950FMNWQF450
Washington County FireWashington County Fire – Tactical Channel154.1900167.9 PLFMNWQF450
Washington County FireEmergency Management Agency155.9400FMNWNKG271

EMS Dispatch

EMS Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMSWashington County EMS – Dispatch155.9025RAN 22NXDN48WQF450

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireWashington County Fire – Dispatch (County)2169454beD
Washington County FireWashington County Fire – Operations (County)2169554bfD
Washington County FireWashington County Fire – Tactical Channel (County)2169654c0D
Washington County EMSWashington County EMS – Dispatch (County)2169154bbD
Washington County EMSWashington County EMS – Operations (County)2169254bcD
Washington County EMSWashington County EMS – Tactical Channel (County)2169354bdD

Common questions

What frequency does the fire department use in Fairview?

We do not have a fire dispatch channel listed specifically for Fairview. The county-level fire dispatch channels in the same county: Washington County Fire 155.4900 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Fairview?

We do not have a EMS dispatch channel listed specifically for Fairview. The county-level EMS dispatch channels in the same county: Washington County EMS 155.9025 MHz, NXDN48, RAN 22.

Do fire departments and EMS use a trunked radio system in Fairview?

Yes. The county-level systems that cover Fairview are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fairview?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.