About Warrick County Fire and EMS Frequencies
Quick answer: Fire dispatch for Warrick County: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Warrick County Fire talkgroup 21675 (hex 54ab).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Warrick County, start with the Scalesville site of Indiana Project Hoosier SAFE-T. Its control channels: 852.4, 852.95, 853.4375 MHz.
Data updated .
Warrick County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Dispatch | 154.4450 In 159.3600 | 91.5 PL | FMN | WSGG878 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Talkaround | 453.6875 | 91.5 PL | FMN | WPUW590 |
Warrick County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warrick County Fire | Warrick County Fire – Dispatch | 21675 | 54ab | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21676 | 54ac | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21677 | 54ad | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21678 | 54ae | D |
| Warrick County Fire | Warrick County Fire – Fire Ground | 21679 | 54af | D |
| Warrick County EMS | Warrick County EMS – Dispatch | 21673 | 54a9 | D |
| Warrick County EMS | Warrick County EMS – Operations | 21674 | 54aa | D |
Radio system sites in Warrick County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Warrick County
- Anderson
- Ash Iron Springs
- Baugh City
- Boon
- Boonville
- Bullocktown
- Camp Brosend
- Campbell
- Castle Garden
- Center
- Chandler
- Dayville
- De Gonia Springs
- Dickeyville
- Eames
- Eby
- Elberfeld
- Fisherville
- Folsomville
- Graham Valley
- Greenbrier
- Greer
- Hart
- Heilman
- Hemenway
- Hillcrest Terrace
- Jarretts
- Jockey
- Lane
- Loafers Station
- Lynnville
- Millersburg
- New Hope
- Newburgh
- Ohio
- Owen
- Paradise
- Pelzer
- Pigeon
- Red Bush
- Rolling Acres
- Rosebud
- Rustic Hills
- Saint John
- Scalesville
- Selvin
- Skelton
- Stanley
- Stevenson
- Tennyson
- Turpin Hill
- Vanada
- Victoria
- Wheatonville
- Yankeetown
Common questions
What frequency does the fire department use in Warrick County?
Fire dispatch channels listed for Warrick County: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL.
Do fire departments and EMS use a trunked radio system in Warrick County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Warrick County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Warrick County?
For Warrick County, start with the Scalesville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4, 852.95, 853.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Warrick County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Warrick County are marked encrypted.
Are Warrick County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Warrick County are marked encrypted.