Skip to content

Wabash County Fire and EMS Frequencies

Wabash County in Indiana has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 32 cities and communities below for local fire departments and EMS agencies.

About Wabash County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wabash County: Wabash County Fire 154.3100 MHz, narrow FM, 151.4 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wabash County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wabash County FireWabash County Fire – Dispatch – South154.3100
In 150.8050
151.4 PLFMNKNDT246
Wabash County FireWabash County Fire – Dispatch – Central154.3100
In 151.1600
151.4 PLFMNKNDT246
Wabash County FireWabash County Fire – Dispatch – North154.3100
In 159.2850
151.4 PLFMNKNDT246

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wabash County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chester Township (N Manchester)Chester Township (N Manchester) – Operations (Channel 2)154.4450FMNKBZ944
Wabash County FireWabash County Fire – Tactical Channel153.9050114.8 PLFMNKNDT246
Wabash County FireWabash County Fire – Tactical Channel154.0700114.8 PLFMNWPLU983
Wabash County FireWabash County Fire – Tactical Channel154.4450FMNKBZ944

Radio system sites in Wabash County

Program the control channel first; your scanner finds the voice channels from it.

Wabash · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 49 (hex 31) · NAC 6B9
Control 852.975, 856.7375
Voice 851.4375, 851.9375, 852.4875
Somerset · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 58 (hex 3A) · NAC 6B8
Control 853.5375, 853.8625
Voice 851.7, 852.7875, 853.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wabash County

Common questions

What frequency does the fire department use in Wabash County?

Fire dispatch channels listed for Wabash County: Wabash County Fire 154.3100 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Wabash County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Wabash County?

For Wabash County, start with the Wabash site of Indiana Project Hoosier SAFE-T. Its control channels are 852.975, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wabash County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Wabash County are marked encrypted.