About Vanderburgh County Fire and EMS Frequencies
Quick answer: Fire dispatch for Vanderburgh County: Vanderburgh County Fire 154.2200 MHz, narrow FM, 110.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Vanderburgh County Fire talkgroup 21653 (hex 5495).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups; Vanderburgh County Public Safety (P25) (Project 25): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Vanderburgh County, start with the Evansville site of Indiana Project Hoosier SAFE-T. Its control channels: 853.9125, 854.0625 MHz.
Data updated .
Vanderburgh County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vanderburgh County Fire | County Fire – Dispatch | 154.2200 | 110.9 PL | FMN | WPTV365 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vanderburgh County Fire | Evansville Fire – Backup (for County Mutual Aid) | 153.9500 | FMN | KSC497 | |
| Vanderburgh County Fire | Perry Township Fire | 154.1450 In 159.0150 | 271 DPL | FMN | KKG751 |
| Vanderburgh County Fire | Scott Township Fire | 154.1750 In 153.7700 | FMN | WYF993 | |
| Vanderburgh County Fire | German Township Fire | 154.2350 In 153.8300 | 77.0 PL | FMN | KXV569 |
| Vanderburgh County Fire | County Fireground Common | 154.3850 | 110.9 PL | FMN | WPTV365 |
| Vanderburgh County Fire | McCutchanville Fire | 154.4000 | FMN | KGT478 | |
| Vanderburgh County Fire | County Fire – Link | 460.5750 | FMN | WPTV365 | |
| Vanderburgh County Fire | Evansville Fire – Link | 460.6000 | FMN | KSC497 |
Vanderburgh County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Vanderburgh County Fire | Vanderburgh County Fire – Common (County) | 21653 | 5495 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Operations (County) | 21667 | 54a3 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Operations (County) | 21668 | 54a4 | D |
| Vanderburgh County EMS | Vanderburgh County EMS – Dispatch (County) | 21666 | 54a2 | D |
Vanderburgh County Public Safety (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Evansville Regional Airport | Evansville Regional Airport – Dispatch | 613 | 265 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Dispatch | 517 | 205 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Tactical Channel (Common) | 502 | 1f6 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Tactical Channel (Common) | 506 | 1fa | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Tactical Channel (Common) | 510 | 1fe | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Tactical Channel (Common) | 514 | 202 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Fire Ground (Common) | 519 | 207 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Fire Ground (Common) | 520 | 208 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Fire Ground (Common) | 521 | 209 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Tactical Channel (Common) | 522 | 20a | D |
| Vanderburgh County Fire | Scott Township Fire – Administration/Training | 500 | 1f4 | D |
| Vanderburgh County Fire | Vanderburgh County Fire – Administration/Training | 501 | 1f5 | D |
| Vanderburgh County Fire | German Township Fire – Administration/Training | 505 | 1f9 | D |
| Vanderburgh County Fire | Perry Township Fire – Administration/Training | 509 | 1fd | D |
Radio system sites in Vanderburgh County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Vanderburgh County
- Armstrong
- Center
- Country Club Meadows
- Crossroads
- Cypress
- Darmstadt
- Daylight
- Earle
- Elliott
- Erskine Station
- Evansville
- German
- Harwood
- Highland
- Hillsdale
- Inglefield
- Kasson
- Knight
- Knob Hill
- Kratzville
- Lakewood Hills
- Martin
- McCutchanville
- Mechanicsville
- Melody Hill
- Mud Center
- Nisbet
- Perry
- Pigeon
- Rahm
- Red Bank
- Saint Joseph
- Saint Wendel
- Scott
- Smythe
- Stacer
- Stringtown
- Union
- Vaughan
Common questions
What frequency does the fire department use in Vanderburgh County?
Fire dispatch channels listed for Vanderburgh County: Vanderburgh County Fire 154.2200 MHz, narrow FM, 110.9 PL.
Do fire departments and EMS use a trunked radio system in Vanderburgh County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups; Vanderburgh County Public Safety (P25) (Project 25): 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Vanderburgh County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Vanderburgh County?
For Vanderburgh County, start with the Evansville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9125, 854.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Vanderburgh County fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Vanderburgh County are marked encrypted.
Are Vanderburgh County fire and EMS talkgroups encrypted?
None of the 18 talkgroups listed for Vanderburgh County are marked encrypted.