About Tipton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Tipton County: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL. EMS dispatch for Tipton County: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Tipton County Fire talkgroup 12347 (hex 303b).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Tipton County, start with the Tipton site of Indiana Project Hoosier SAFE-T. Its control channels: 852.6625, 852.9375 MHz.
Data updated .
Tipton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Tipton Fire | 154.9800 | 156.7 PL | FMN | KCT628 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Tipton County Emergency Management | 154.0550 | FMN | KNFP374 | |
| County Fire/EMS/Emergency Management | Cicero Twp. Fireground | 154.1450 | 100.0 PL | FMN | WPWX504 |
| County Fire/EMS/Emergency Management | Hobbs Fireground | 154.2200 | CSQ | FMN | KNGG536 |
| County Fire/EMS/Emergency Management | Madison Township Fireground | 154.2200 | 100.0 PL | FMN | KNGG536 |
| County Fire/EMS/Emergency Management | Sharpsville and Windfall Fireground | 154.3850 | 100.0 PL | FMN | WNVB805 |
| County Fire/EMS/Emergency Management | Tipton city and Kempton Fireground | 154.4300 | 100.0 PL | FMN | WNKG574 |
| County Fire/EMS/Emergency Management | Kempton Fireground | 156.0000 | FMN | WQEB371 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Rural Metro EMS | 155.2200 | FMN | WPMB966 |
Tipton County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tipton County Fire | Tipton County Fire – Dispatch (County) | 12347 | 303b | D |
| Tipton County Fire | Tipton County Fire – Talk (County) | 12348 | 303c | D |
Radio system sites in Tipton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Tipton County
Common questions
What frequency does the fire department use in Tipton County?
Fire dispatch channels listed for Tipton County: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Tipton County?
EMS dispatch channels listed for Tipton County: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Tipton County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Tipton County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Tipton County?
For Tipton County, start with the Tipton site of Indiana Project Hoosier SAFE-T. Its control channels are 852.6625, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Tipton County fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Tipton County are marked encrypted.
Are Tipton County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Tipton County are marked encrypted.