About Dugger Fire and EMS Frequencies
Quick answer: Fire dispatch for Dugger: Dugger Fire 155.1450 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Sullivan County Fire talkgroup 12320 (hex 3020).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Dugger, start with the Linton site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 853.75, 859.7375 MHz.
Data updated .
Dugger conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dugger Fire | Dugger Fire – Dispatch (Simulcast of 154.25) | 155.1450 In 158.9550 | 203.5 PL | FMN | KNGQ566 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dugger Fire | Dugger Fire – Tactical | 154.1150 | 203.5 PL | FMN | KNGQ566 |
Sullivan County channels that also cover Dugger
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County Fire | Sullivan County Fire – Dispatch – East | 154.2500 In 159.2700 | 203.5 PL | FMN | KAV729 |
| Sullivan County Fire | Sullivan County Fire – Dispatch Main | 155.8950 In 150.7750 | 203.5 PL | FMN | WPRG701 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan City Fire | Sullivan City Fire – Tactical | 153.8900 | FMN | KAV729 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sullivan County Fire | Sullivan County Fire – Dispatch | 12320 | 3020 | D |
| Sullivan County Fire | Sullivan County Fire – Operations | 12321 | 3021 | D |
| Sullivan County Fire | Sullivan County Fire – Operations | 12322 | 3022 | D |
| Sullivan County EMS | Sullivan County EMS – Operations | 12319 | 301f | D |
Nearest trunked radio sites
Distances are measured from the center of Dugger.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Dugger?
Fire dispatch channels listed for Dugger: Dugger Fire 155.1450 MHz, narrow FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in Dugger?
Yes. The county-level systems that cover Dugger are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Dugger?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Dugger?
For Dugger, start with the Linton site of Indiana Project Hoosier SAFE-T. Its control channels are 853.75, 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Dugger fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Dugger are marked encrypted.