Skip to content

Starke County Fire and EMS Frequencies

Starke County in Indiana has 13 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 27 cities and communities below for local fire departments and EMS agencies.

About Starke County Fire and EMS Frequencies

Quick answer: Fire dispatch for Starke County: Starke County Fire/EMS 153.7400 MHz, narrow FM, 100.0 PL. EMS dispatch for Starke County: Starke County Fire/EMS 154.1150 MHz, narrow FM, 97.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Starke County Fire talkgroup 12295 (hex 3007).

  • 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Starke County, start with the Bass Lake site of Indiana Project Hoosier SAFE-T. Its control channels: 853.3375, 853.7375 MHz.

Data updated .

Starke County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Starke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Starke County Fire/EMSCounty Fire Dispatch153.7400
In 151.4150
100.0 PLFMNKSB416
Starke County Fire/EMSUHF Link – San Pierre453.3125CSQFMNWQBQ325
Starke County Fire/EMSUHF Link – San Pierre453.5375CSQFMNWQBQ325
Starke County Fire/EMSUHF Link – Knox458.3125CSQFMNWQBQ325
Starke County Fire/EMSUHF Link – Knox458.5375CSQFMNWQBQ325

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Starke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Starke County Fire/EMSStarke County Fire/EMS – Tactical Channel (Channel 5)153.7625712 DPLFMN—
Starke County Fire/EMSStarke County Fire/EMS – Tactical Channel (Channel 4)153.845097.4 PLFMN—
Starke County Fire/EMSStarke County Fire/EMS – Tactical Channel (Channel 6)154.0100712 DPLFMN—
Starke County Fire/EMSStarke County Fire/EMS – Tactical Channel (Channel 3)154.2800CSQFMN—
Starke County Fire/EMSStarke County Fire/EMS – Fire Ground154.3700100.0 PLFMNKNJR759

Fire Talk-around

Fire Talk-around frequencies for Starke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Starke County Fire/EMSStarke County Fire/EMS – Fire Ground (Channel 2)153.7400100.0 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Starke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Starke County Fire/EMSStarke County Fire/EMS – Dispatch154.115097.4 PLFMNWQB718
Starke County Fire/EMSStarke EMS Dispatch155.6625712 DPLFMN—

Starke County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Starke County FireStarke County Fire – Dispatch122953007D
Starke County FireStarke County Fire – Fire Ground122963008D
Starke County FireStarke County Fire – Fire Ground122973009D
Starke County FireStarke County Fire – Fire Ground12298300aD
Starke County FireStarke County Fire – Fire Ground12299300bD
Starke County EMSStarke County EMS – Dispatch122913003D
Starke County EMSStarke County EMS – Operations122923004D
Starke County EMSStarke County EMS – Operations122933005D
Starke County EMSStarke County EMS – Operations122943006D

Radio system sites in Starke County

Program the control channel first; your scanner finds the voice channels from it.

Bass Lake · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 61 (hex 3D) · NAC 6B1
Control 853.3375, 853.7375
Voice 851.3625, 852.3625, 853.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Starke County

Common questions

What frequency does the fire department use in Starke County?

Fire dispatch channels listed for Starke County: Starke County Fire/EMS 153.7400 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Starke County?

EMS dispatch channels listed for Starke County: Starke County Fire/EMS 154.1150 MHz, narrow FM, 97.4 PL.

Do fire departments and EMS use a trunked radio system in Starke County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Starke County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Starke County?

For Starke County, start with the Bass Lake site of Indiana Project Hoosier SAFE-T. Its control channels are 853.3375, 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Starke County fire and EMS frequencies encrypted?

None of the 13 conventional frequencies listed for Starke County are marked encrypted.

Are Starke County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Starke County are marked encrypted.