About Rushville Fire and EMS Frequencies
Quick answer: Fire dispatch for Rushville: Rushville Fire 156.1950 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Rushville Fire talkgroup 12192 (hex 2fa0).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups; Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rushville, start with the Rushville site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 852.9625, 853.4625 MHz.
Data updated .
Rushville conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rushville Fire | Fire/EMS Dispatch | 156.1950 In 158.9850 | 131.8 PL | FMN | WQCB683 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rushville Fire | Rushville Fire – Fire Ground | 154.4150 | FMN | KJD846 |
Rushville trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rushville Fire | Rushville Fire – Dispatch | 12192 | 2fa0 | D |
| Rushville Fire | Rushville Fireground | 12193 | 2fa1 | D |
Rush County channels that also cover Rushville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anderson Township (Milroy) | Anderson Township (Milroy) – Tone-Outs | 151.5350 In 155.0625 | RAN 40 | NXDN48 | WNWJ929 |
| Rush County Fire | Rush County Fire – Dispatch | 154.3550 | 131.8 PL | FMN | KVC540 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rush County Fire | Rush County Fire – Fire Ground | 154.1600 | CSQ | FMN | KUZ682 |
| Rushville Township Fire | Rushville Township Fire – Fire Ground | 154.2650 | FMN | WQGI878 | |
| Rushville Township Fire | Rushville Township Fire – Fire Ground | 159.3600 | FMN | WQGI878 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Rush County Fire | County Fire – Dispatch | 12187 | 2f9b | D |
| Rush County Fire | County Fireground | 12188 | 2f9c | D |
| Rush County Fire | County Fireground | 12189 | 2f9d | D |
| Rush County Fire | County Fireground | 12190 | 2f9e | D |
| Rush County Fire | County Fireground | 12191 | 2f9f | D |
| Rush County EMS | County EMS – Operations | 12183 | 2f97 | D |
Nearest trunked radio sites
Distances are measured from the center of Rushville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rushville?
Fire dispatch channels listed for Rushville: Rushville Fire 156.1950 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Rushville?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rushville?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rushville?
For Rushville, start with the Rushville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Rushville fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Rushville are marked encrypted.
Are Rushville fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Rushville are marked encrypted.