Skip to content

Rush County Police Frequencies

Rush County in Indiana has 2 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 38 cities and communities below for local police departments.

About Rush County Police Frequencies

Quick answer: Dispatch for Rush County: Rush County Sheriff 155.6250 MHz, narrow FM, 179.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Rush County Sheriff talkgroup 12185 (hex 2f99).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rush County, start with the Rushville site of Indiana Project Hoosier SAFE-T. Its control channels: 852.9625, 853.4625 MHz.

Data updated .

Rush County conventional frequencies

Dispatch

Dispatch frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County SheriffRush County Sheriff – Dispatch155.6250
In 154.6500
179.9 PLFMNWZX813

Tactical

Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County SheriffSheriff/Rushville Police158.8200FMNWZX813

Rush County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County SheriffRush County Sheriff – Dispatch121852f99D
Rush County SheriffRush County Sheriff – Tactical Channel121862f9aD
Rush County SheriffCar-to-Car121842f98D

Radio system sites in Rush County

Program the control channel first; your scanner finds the voice channels from it.

Rushville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 76 (hex 4C) · NAC 6B9
Control 852.9625, 853.4625
Voice 851.4875, 851.9625, 852.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Rush County

Common questions

What frequency do the police use in Rush County?

Dispatch channels listed for Rush County: Rush County Sheriff 155.6250 MHz, narrow FM, 179.9 PL.

What is the sheriff's dispatch frequency in Rush County?

Rush County Sheriff 155.6250 MHz, narrow FM, 179.9 PL.

Do the police use a trunked radio system in Rush County?

Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Rush County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rush County?

For Rush County, start with the Rushville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.9625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Rush County police frequencies encrypted?

None of the 2 conventional frequencies listed for Rush County are marked encrypted.

Are Rush County police talkgroups encrypted?

None of the 3 talkgroups listed for Rush County are marked encrypted.