Skip to content

Charlottesville Fire and EMS Frequencies

We do not have frequencies listed specifically for Charlottesville in Rush County, Indiana yet. Countywide channels for Rush County that may also cover this area are shown below when we have them.

About Charlottesville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Charlottesville: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Rush County Fire talkgroup 12187 (hex 2f9b).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Rush County channels that also cover Charlottesville

Fire Dispatch

Fire Dispatch frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson Township (Milroy)Anderson Township (Milroy) – Tone-Outs151.5350
In 155.0625
RAN 40NXDN48WNWJ929
Rush County FireRush County Fire – Dispatch154.3550131.8 PLFMNKVC540

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rush County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rush County FireRush County Fire – Fire Ground154.1600CSQFMNKUZ682
Rushville Township FireRushville Township Fire – Fire Ground154.2650FMNWQGI878
Rushville Township FireRushville Township Fire – Fire Ground159.3600FMNWQGI878

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Rush County FireCounty Fire – Dispatch121872f9bD
Rush County FireCounty Fireground121882f9cD
Rush County FireCounty Fireground121892f9dD
Rush County FireCounty Fireground121902f9eD
Rush County FireCounty Fireground121912f9fD
Rush County EMSCounty EMS – Operations121832f97D

Common questions

What frequency does the fire department use in Charlottesville?

We do not have a fire dispatch channel listed specifically for Charlottesville. The county-level fire dispatch channels in the same county: Anderson Township (Milroy) 151.5350 MHz, NXDN48, RAN 40; Rush County Fire 154.3550 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Charlottesville?

Yes. The county-level systems that cover Charlottesville are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Charlottesville?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.