Skip to content

Ripley County Fire and EMS Frequencies

Ripley County in Indiana has 7 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 49 cities and communities below for local fire departments and EMS agencies.

About Ripley County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ripley County: Ripley County Fire 154.2350 MHz, narrow FM, CSQ. EMS dispatch for Ripley County: Ripley County EMS 155.2050 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Ripley County Fire talkgroup 21610 (hex 546a).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ripley County, start with the Versailles site of Indiana Project Hoosier SAFE-T. Its control channels: 851.95, 852.475, 852.7125 MHz.

Data updated .

Ripley County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County FireRipley County Fire – Fire Ground (former Dispatch South)154.2350CSQFMNWQM259
Ripley County FireRipley County Fire – Dispatch – Simulcast (5 Sites)155.9325
In 153.8525
516 DPLFMNWRVG498

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County FireEMA151.0550100.0 PLFMNKJX494
Ripley County FireRipley County Fire – Fire Ground154.1900CSQFMNWQM259
Ripley County FireRipley County Fire – Fire Ground (Channel 3)154.2650FMNWQM259
Ripley County FireRipley County Fire – Fire Ground (Channel 4)154.9950FMNKJX494

EMS Dispatch

EMS Dispatch frequencies for Ripley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ripley County EMSRipley County EMS – Dispatch155.2050CSQFMNKNEQ243

Ripley County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Ripley County FireCounty Fire/EMS Dispatch21610546aD
Ripley County FireCounty Fire/EMS Operations21611546bD
Ripley County FireCounty Fire/EMS Operations21612546cD
Ripley County FireCounty Fire/EMS Operations21613546dD

Radio system sites in Ripley County

Program the control channel first; your scanner finds the voice channels from it.

Versailles · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 29 (hex 1D) · NAC 6B2
Control 851.95, 852.475, 852.7125, 853.3875
Voice 851.425
Batesville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 44 (hex 2C) · NAC 6B4
Control 852.125, 853.2125, 853.8125
Voice 851.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ripley County

Common questions

What frequency does the fire department use in Ripley County?

Fire dispatch channels listed for Ripley County: Ripley County Fire 154.2350 MHz, narrow FM, CSQ.

What frequency does EMS or the ambulance service use in Ripley County?

EMS dispatch channels listed for Ripley County: Ripley County EMS 155.2050 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Ripley County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ripley County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ripley County?

For Ripley County, start with the Versailles site of Indiana Project Hoosier SAFE-T. Its control channels are 851.95, 852.475, 852.7125, 853.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ripley County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Ripley County are marked encrypted.

Are Ripley County fire and EMS talkgroups encrypted?

None of the 4 talkgroups listed for Ripley County are marked encrypted.