About Randolph County Fire and EMS Frequencies
Quick answer: Fire dispatch for Randolph County: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL. EMS dispatch for Randolph County: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Randolph County Fire talkgroup 12173 (hex 2f8d).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Randolph County, start with the Union City site of Indiana Project Hoosier SAFE-T. Its control channels: 853.45, 853.925 MHz.
Data updated .
Randolph County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Fire/EMS Dispatch | 154.1300 In 150.8050 | 114.8 PL | FMN | KNNS706 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Randolph County Fire | Firre/EMS Operations | 154.2800 | 114.8 PL | FMN | KNNS706 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Culberson Ambulance Service | Culberson Ambulance Service | 155.2350 In 153.6200 | 114.8 PL | FM | — |
Randolph County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | County Fire Dispatch | 12173 | 2f8d | D |
| Randolph County EMS | County EMS Dispatch | 12172 | 2f8c | D |
Randolph County Government
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Randolph County Fire | County Fire Dispatch | 10016 | 2720 | D |
| Randolph County Fire | County Fireground | 10018 | 2722 | D |
| Randolph County Fire | County Fireground | 10019 | 2723 | D |
| Randolph County Fire | County Fireground | 10020 | 2724 | D |
| Randolph County Fire | County Fireground | 10021 | 2725 | D |
| Randolph County Fire | County Fire Water Operations | 10024 | 2728 | D |
| Randolph County EMS | County EMS Dispatch | 10030 | 272e | D |
| Randolph County EMS | County EMS Operations | 10031 | 272f | D |
| Randolph County EMS | County EMS Operations | 10032 | 2730 | D |
| Randolph County EMS | County EMS Operations | 10033 | 2731 | D |
| Randolph County EMS | County EMS Operations | 10034 | 2732 | D |
Radio system sites in Randolph County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Randolph County
- Arba
- Bartonia
- Bloomingport
- Buena Vista
- Carlos
- Crete
- Deerfield
- Fairview
- Farmland
- Franklin
- Georgetown
- Green
- Greensfork
- Harrisville
- Haysville Corner
- Huntsville
- Jackson
- Losantville
- Lynn
- Maxville
- Modoc
- Monroe
- Mull
- New Lisbon
- New Pittsburg
- Parker City
- Pinch
- Randolph
- Ridgeville
- Rural
- Saratoga
- Scott Corner
- Shedville
- Snow Hill
- South Salem
- Spartanburg
- Stone
- Stoney Creek
- Union City
- Unionport
- Ward
- Washington
- Wayne
- White River
- Winchester
- Windsor
Common questions
What frequency does the fire department use in Randolph County?
Fire dispatch channels listed for Randolph County: Randolph County Fire 154.1300 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Randolph County?
EMS dispatch channels listed for Randolph County: Culberson Ambulance Service 155.2350 MHz, FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Randolph County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups; Randolph County Government: 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Randolph County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Randolph County?
For Randolph County, start with the Union City site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Randolph County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Randolph County are marked encrypted.
Are Randolph County fire and EMS talkgroups encrypted?
None of the 13 talkgroups listed for Randolph County are marked encrypted.