About Pulaski County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pulaski County: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL. EMS dispatch for Pulaski County: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Pulaski County Fire talkgroup 12144 (hex 2f70).
- 13 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pulaski County, start with the Medaryville site of Indiana Project Hoosier SAFE-T. Its control channels: 853.425, 853.925 MHz.
Data updated .
Pulaski County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Dispatch | 154.4000 | 94.8 PL | FMN | WNAA622 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | Rescue Squad | 155.2050 | FMN | WNMR878 | |
| Pulaski County Fire/EMS | EMA – Operations | 155.9850 | FMN | KNFF776 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | United EMS – Winamac Dispatch | 152.3975 | FMN | — | |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.2250 | 423 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.4000 | 464 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.7500 | 411 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Winamac | 453.9250 | 412 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Star City | 458.2250 | 431 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Francisville | 458.4000 | 465 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Monteray | 458.7500 | 411 DPL | FMN | WPMH292 |
| Pulaski County Fire/EMS | Pulaski County Fire/EMS – Remote Link – Medaryville | 458.9250 | 413 DPL | FMN | WPMH292 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pulaski County Fire/EMS | United EMS | 158.7000 | FMN | — |
Pulaski County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pulaski County Fire | County Fire Dispatch | 12144 | 2f70 | D |
| Pulaski County EMS | County EMS Dispatch | 12143 | 2f6f | D |
Radio system sites in Pulaski County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pulaski County
Common questions
What frequency does the fire department use in Pulaski County?
Fire dispatch channels listed for Pulaski County: Pulaski County Fire/EMS 154.4000 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Pulaski County?
EMS dispatch channels listed for Pulaski County: Pulaski County Fire/EMS 152.3975 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Pulaski County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pulaski County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pulaski County?
For Pulaski County, start with the Medaryville site of Indiana Project Hoosier SAFE-T. Its control channels are 853.425, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pulaski County fire and EMS frequencies encrypted?
None of the 13 conventional frequencies listed for Pulaski County are marked encrypted.
Are Pulaski County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Pulaski County are marked encrypted.