About Porter County Fire and EMS Frequencies
Quick answer: Fire dispatch for Porter County: Porter County Fire/EMS 154.3100 MHz, narrow FM, 114.8 PL. EMS dispatch for Porter County: Porter County Fire/EMS 151.4600 MHz, narrow FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Porter County Fire talkgroup 12559 (hex 310f).
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Porter County, start with the Porter Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels: 771.29375, 771.55625, 771.56875 MHz.
Data updated .
Porter County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Porter County Fire/EMS | Porter County Fire/EMS – Dispatch | 154.3100 In 159.0750 | 114.8 PL | FMN | WNVJ853 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Portage Township Fire | Fire Private Channel | 155.8950 | FMN | WPPU294 | |
| Porter County Fire/EMS | Mittal Steel Fire | 153.2000 | 141.3 PL | FMN | KFE921 |
| Porter County Fire/EMS | Porter County Fire/EMS – Tactical Channel | 153.8300 | 114.8 PL | FMN | WNVJ853 |
| Porter County Fire/EMS | Porter County Fire/EMS – Tactical Channel | 154.1300 | 114.8 PL | FMN | WNVJ853 |
| Porter County Fire/EMS | Porter County Fire/EMS – Tactical Channel | 154.2350 | 114.8 PL | FMN | WNVJ853 |
| Porter County Fire/EMS | Porter County Fire/EMS – Tactical Channel | 154.2800 | 114.8 PL | FMN | WNVJ853 |
| Porter County Fire/EMS | Porter County Fire/EMS – Tactical Channel | 154.4450 | 114.8 PL | FMN | WNVJ853 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Porter County Fire/EMS | Porter Hospital EMS | 151.4600 In 153.7850 | 114.8 PL | FMN | WPPX683 |
| Porter County Fire/EMS | Porter County Fire/EMS – Dispatch | 155.2350 In 150.7750 | 110.9 PL | FMN | KKU309 |
Porter County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Porter County Fire | County Fire Dispatch | 12559 | 310f | D |
| Porter County Fire | Countywide Fireground Operations | 12128 | 2f60 | D |
| Porter County Fire | Countywide Fire/EMS Talkaround | 12131 | 2f63 | D |
| Porter County Fire | Countywide Fireground Operations | 12132 | 2f64 | D |
| Porter County Fire | Countywide Fireground Operations | 12133 | 2f65 | D |
| Porter County Fire | Countywide Fireground Operations | 12134 | 2f66 | D |
| Porter County Fire | Countywide Fire Emergency | 12541 | 30fd | D |
| Porter County Fire | Valparasio Fire – Fireground | 12558 | 310e | D |
| Porter County EMS | County Health Department | 12125 | 2f5d | D |
| Porter County EMS | Porter County EMS Operations Talk-Around | 12557 | 310d | D |
Radio system sites in Porter County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Porter County
Common questions
What frequency does the fire department use in Porter County?
Fire dispatch channels listed for Porter County: Porter County Fire/EMS 154.3100 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Porter County?
EMS dispatch channels listed for Porter County: Porter County Fire/EMS 151.4600 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Porter County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Porter County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Porter County?
For Porter County, start with the Porter Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 771.29375, 771.55625, 771.56875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Porter County fire and EMS frequencies encrypted?
None of the 10 conventional frequencies listed for Porter County are marked encrypted.
Are Porter County fire and EMS talkgroups encrypted?
None of the 10 talkgroups listed for Porter County are marked encrypted.