Skip to content

Parke County Fire and EMS Frequencies

Parke County in Indiana has 2 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 70 cities and communities below for local fire departments and EMS agencies.

About Parke County Fire and EMS Frequencies

Quick answer: Fire dispatch for Parke County: County Public Safety 154.3700 MHz, narrow FM, 85.4 PL. EMS dispatch for Parke County: County Public Safety 155.2950 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Parke County Fire talkgroup 12116 (hex 2f54).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Parke County, start with the Marshall site of Indiana Project Hoosier SAFE-T. Its control channels: 857.4875, 858.4875, 858.6625 MHz.

Data updated .

Parke County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Parke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Dispatch154.370085.4 PLFMNKSH221

EMS Dispatch

EMS Dispatch frequencies for Parke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Public SafetyCounty Public Safety – Dispatch155.295085.4 PLFMNKDG426

Parke County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Parke County FireParke County Fire – Dispatch121162f54D
Parke County FireParke County Fire – Fire Ground121122f50D
Parke County FireParke County Fire – Fire Ground121132f51D
Parke County FireParke County Fire – Fire Ground121142f52D
Parke County FireParke County Fire – Fire Ground121152f53D
Parke County EMSParke County EMS – Dispatch121102f4eD
Parke County EMSParke County EMS – Operations121112f4fD

Radio system sites in Parke County

Program the control channel first; your scanner finds the voice channels from it.

Marshall · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 28 (hex 1C) · NAC 6BA
Control 857.4875, 858.4875, 858.6625
Voice 851.8875, 853.875
Bridgeton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 82 (hex 52) · NAC 6B2
Control 853.9625, 859.4875
Voice 851.4625, 852.4875, 852.9875, 853.4875
INDOC Rockville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 89 (hex 59) · NAC 6B4
Control 853.2375, 859.5375
Voice 851.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Parke County

Common questions

What frequency does the fire department use in Parke County?

Fire dispatch channels listed for Parke County: County Public Safety 154.3700 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in Parke County?

EMS dispatch channels listed for Parke County: County Public Safety 155.2950 MHz, narrow FM, 85.4 PL.

Do fire departments and EMS use a trunked radio system in Parke County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Parke County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Parke County?

For Parke County, start with the Marshall site of Indiana Project Hoosier SAFE-T. Its control channels are 857.4875, 858.4875, 858.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Parke County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Parke County are marked encrypted.

Are Parke County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Parke County are marked encrypted.