Skip to content

Newton County Fire and EMS Frequencies

Newton County in Indiana has 4 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 28 cities and communities below for local fire departments and EMS agencies.

About Newton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Newton County: Newton County Fire 151.4675 MHz, narrow FM, 162 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Newton County EMS talkgroup 12083 (hex 2f33).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 1 talkgroup; Newton County Government (IN): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Newton County, start with the Morocco site of Indiana Project Hoosier SAFE-T. Its control channels: 852.95, 853.95 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Newton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Newton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Newton County FireFire/EMS/EMA – North (Lake Village)151.4675
In 159.3900
162 DPLFMNWNQG217
Newton County FireFire/EMS/EMA – South (Goodland)154.0475
In 159.0075
156.7 PLFMNWQWA523
Newton County Fire UnconfirmedFire/EMS/EMA – Central / Outdoor Warning Sirens (Enos)158.8050
In 153.7550
156.7 PLFMNWNQG217

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Newton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Thayer/Lincoln Township Fire Expired: Expired 8/04Thayer/Lincoln Township Fire – Fire Ground154.3550156.7 PLFMNKWS645

Newton County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Newton County EMSEMA/EMS – Operations (County)120832f33D

Newton County Government (IN)

Newton County Government (IN) talkgroups
AgencyDescriptionTalkgroupHexMode
Newton County FireNewton County Fire – Dispatch44T
Newton County FireLincoln Township Fire – Operations1812T
Newton County FireMoroco Fire – Operations2014T
Newton County EMSNewton County EMS – Operations2115T
1 encrypted talkgroup (cannot be monitored)
Newton County Government (IN) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Newton County FireNewton County Fire – Private2216T Encrypted

Radio system sites in Newton County

Program the control channel first; your scanner finds the voice channels from it.

Morocco · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 63 (hex 3F) · NAC 6B3
Control 852.95, 853.95
Voice 851.95, 852.45
Simulcast · Newton County Government (IN)
RFSS 1 · Site 1 (hex 1) · NAC 420
Control 770.08125, 770.09375, 771.08125, 771.09375
Voice 772.20625, 772.70625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Newton County

Common questions

What frequency does the fire department use in Newton County?

Fire dispatch channels listed for Newton County: Newton County Fire 151.4675 MHz, narrow FM, 162 DPL.

Do fire departments and EMS use a trunked radio system in Newton County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 1 talkgroup; Newton County Government (IN): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Newton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Newton County?

For Newton County, start with the Morocco site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Newton County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Newton County are marked encrypted.

Are Newton County fire and EMS talkgroups encrypted?

1 of the 6 talkgroups listed for Newton County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.