Skip to content

Morgan County Fire and EMS Frequencies

Morgan County in Indiana has 7 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 77 cities and communities below for local fire departments and EMS agencies.

About Morgan County Fire and EMS Frequencies

Quick answer: Fire dispatch for Morgan County: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Morgan County Fire talkgroup 12037 (hex 2f05).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Morgan County, start with the Mooresville site of Indiana Project Hoosier SAFE-T. Its control channels: 852.975, 853.2, 853.475 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Morgan County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireMorgan County Fire – Dispatch (Simulcast on SAFE – T)154.3700
In 151.4150
114.8 PLFMNWPHZ781

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireCounty Emergency Management/911 Dispatch151.0775
In 156.1350
NXDN48WRAN954
Morgan County Fire BackupMorgan County Fire – Tactical Channel151.3475
In 153.7400
114.8 PLFMNWQAI268
Morgan County FireMorgan County Fire – Operations151.3700612 DPLFMNWPXP385
Washington Township (Martinsville)Washington Township (Martinsville) – Backup151.4450
In 159.3750
FMNKNCG458

Fire Talk-around

Fire Talk-around frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireMorgan County Fire – Operations151.2650265 DPLFMNWPXP385

EMS Dispatch

EMS Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County EMSI U Health Lifeline Critical Care Transport453.6125
In 458.6125
CC 0 · TG 1 · SL 1DMR EncryptedWQXD621

Morgan County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Morgan County FireMorgan County Fire – Dispatch (County)120372f05D
Morgan County FireMorgan County Fire – Fire Ground (County)120392f07D
Morgan County FireMorgan County Fire – Interop (County)120402f08D
Morgan County FireMorgan County Fire – interop (County)120412f09D
Morgan County FireMorgan County Fire – North Operations (County)120422f0aD
Morgan County FireMorgan County Fire – Operations (County)120432f0bD
Morgan County FireMorgan County Fire – Operations (County)120442f0cD
Morgan County FireMorgan County Fire – Operations (County)120452f0dD
Morgan County FireMorgan County Fire – Operations (County)120462f0eD
Morgan County FireMorgan County Fire – Operations (County)120472f0fD
Morgan County FireMorgan County Fire – Operations (County)120482f10D
Morgan County FireMorgan County Fire – Operations (County)120492f11D
Morgan County FireMorgan County Fire – Operations (County)120502f12D
Morgan County FireMorgan County Fire – Training (County)120512f13D

Radio system sites in Morgan County

Program the control channel first; your scanner finds the voice channels from it.

Mooresville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 16 (hex 10) · NAC 6BB
Control 852.975, 853.2, 853.475, 853.8625
Voice 851.325, 851.9, 852.425, 855.4875, 857.6625, 857.9375
Martinsville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 59 (hex 3B) · NAC 6B5
Control 857.7125, 859.7125
Voice 851.4, 851.7125, 854.3125, 859.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Morgan County

Common questions

What frequency does the fire department use in Morgan County?

Fire dispatch channels listed for Morgan County: Morgan County Fire 154.3700 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Morgan County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Morgan County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Morgan County?

For Morgan County, start with the Mooresville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.975, 853.2, 853.475, 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Morgan County fire and EMS frequencies encrypted?

1 of the 7 conventional frequencies listed for Morgan County are marked encrypted; a scanner cannot decode encrypted audio.

Are Morgan County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for Morgan County are marked encrypted.