Skip to content

Cascade Fire and EMS Frequencies

We do not have frequencies listed specifically for Cascade in Monroe County, Indiana yet. Countywide channels for Monroe County that may also cover this area are shown below when we have them.

About Cascade Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cascade: Monroe County Fire 154.9950 MHz, narrow FM, 131.8 PL. County-level ems dispatch that covers Cascade: IU Bloomington Hospital Ambulance Service 155.3250 MHz, narrow FM, 192.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Monroe County Fire talkgroup 21522 (hex 5412).

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Monroe County channels that also cover Cascade

Fire Dispatch

Fire Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Monroe County FireMonroe County Fire – Dispatch154.9950
In 158.9400
131.8 PLFMNKLS678

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fireground 11 - Monroe Fire Protection DistrictFireground 11 – Monroe Fire Protection District155.8650
In 153.7400
131.8 PLFMNWPWU673
Fireground 3 - Monroe Fire Protection DistrictFireground 3 – Monroe Fire Protection District151.2800
In 156.1500
546 DPLFMNWQDS629
Fireground 5 - North Monroe Fire TerritoryFireground 5 – North Monroe Fire Territory154.1900
In 156.0150
151.4 PLFMNWPMD622
Monroe County FireFireground 7 – Ellettsville154.3550
In 153.8300
103.5 PLFMNKNEU536
Monroe County FireFireground 9 – Van Buren Twp154.4300
In 153.8600
82.5 PLFMNWPPB275
Monroe County FireFireground 9 – Van Buren Twp154.4300
In 153.8600
CC 5 · TG 1 · SL 1DMRWPPB275
Van Buren Township FireVan Buren Township Fire – Operations (Channel 2)154.0850131.8 PLFMNWQEG816

EMS Dispatch

EMS Dispatch frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
IU Bloomington Hospital Ambulance ServiceIU Bloomington Hospital Ambulance Service – Dispatch (Channel 1)155.3250
In 150.7750
192.8 PLFMNWPGQ585

EMS Tactical

EMS Tactical frequencies for Monroe County
AgencyDescriptionFrequency (MHz)ToneModeFCC
IU Bloomington Hospital Ambulance ServiceIU Bloomington Hospital Ambulance Service – Talk-Around (Channel 2)155.2200
In 155.8050
071 DPLFMNWPGQ585

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Monroe County FireMonroe County Fire – Dispatch215225412D
Monroe County FireMonroe County Fire – Fire Ground215105406D
Monroe County FireMonroe County Fire – Fire Ground215235413D
Monroe County FireMonroe County Fire – Fire Ground215245414D
Monroe County FireMonroe County Fire – Fire Ground215255415D
Monroe County FireMonroe County Fire – Fire Ground215265416D
Monroe County FireMonroe County Fire – Fire Ground215275417D
Monroe County FireMonroe County Fire – Fire Ground21532541cD
Monroe County EMSMonroe County EMS – Dispatch21516540cD
Monroe County EMSMonroe County EMS – Operations21517540dD

Common questions

What frequency does the fire department use in Cascade?

We do not have a fire dispatch channel listed specifically for Cascade. The county-level fire dispatch channels in the same county: Monroe County Fire 154.9950 MHz, narrow FM, 131.8 PL.

What frequency does EMS or the ambulance service use in Cascade?

We do not have a EMS dispatch channel listed specifically for Cascade. The county-level EMS dispatch channels in the same county: IU Bloomington Hospital Ambulance Service 155.3250 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Cascade?

Yes. The county-level systems that cover Cascade are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cascade?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.