Skip to content

Miami County Fire and EMS Frequencies

Miami County in Indiana has 11 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 41 cities and communities below for local fire departments and EMS agencies.

About Miami County Fire and EMS Frequencies

Quick answer: Fire dispatch for Miami County: Miami County Fire 140.0500 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Miami County Fire talkgroup 10994 (hex 2af2).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25, NXDN48), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Miami County, start with the Peru site of Indiana Project Hoosier SAFE-T. Its control channels: 853.45, 853.975 MHz.

Data updated .

Miami County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Miami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miami County FireGrissom ARB Fire (Dispatch and Operations)140.0500FMN—
Miami County FireGrissom ARB Fire (Dispatch and Operations)140.0500NAC 293P25—
Miami County FireCounty Fire Dispatch154.430088.5 PLFMNKNNS698
Miami County FireConverse Fire/EMS453.6500
In 458.6500
82.5 PLFMNWNSC287

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Miami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mexico Community Fire AssociationMexico Community Fire Association – Fire Ground /Tactical153.995088.5 PLFMNWPVC276
Miami County FireMutual Aid (Including Communications with Air EMS)154.2800CSQFMN—
Pipe Creek Township Volunteer Fire (Bunker Hill)Pipe Creek Township Volunteer Fire (Bunker Hill) – Tactical Channel154.4075114.8 PLFMNWQEQ900
Pipe Creek Township Volunteer Fire (Bunker Hill)Pipe Creek Township Volunteer Fire (Bunker Hill) – Tactical Channel154.4075RAN 49NXDN48WQEQ900
Pipe Creek Township Volunteer Fire (Bunker Hill)Pipe Creek Township Volunteer Fire (Bunker Hill) – Dispatch154.430088.5 PLFMNKSG460
Pipe Creek Township Volunteer Fire (Bunker Hill)Repeater (input to 154.43)158.8800RAN 49NXDN48KSG460

Fire Talk-around

Fire Talk-around frequencies for Miami County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pipe Creek Township Volunteer Fire (Bunker Hill)Fire Operations (input to 154.43)158.880088.5 PLFMNKSG460

Miami County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Miami County FireMiami County Fire – Dispatch109942af2D
Miami County FireMiami County Fire – Fire Ground109952af3D
Miami County FireMiami County Fire – Fire Ground109962af4D
Miami County FireMiami County Fire – Fire Ground109972af5D
Miami County EMSMiami County EMS – Dispatch109912aefD
Miami County EMSMiami County EMS – Operations109922af0D

Radio system sites in Miami County

Program the control channel first; your scanner finds the voice channels from it.

Peru · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 21 (hex 15) · NAC 6BA
Control 853.45, 853.975
Voice 851.375, 851.4, 851.9, 852.425
INDOC Miami Correctional Facility · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 92 (hex 5C) · NAC 6B0
Control 857.2375, 858.2375, 859.2375, 859.5375
Voice 856.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Miami County

Common questions

What frequency does the fire department use in Miami County?

Fire dispatch channels listed for Miami County: Miami County Fire 140.0500 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Miami County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Miami County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25, NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Miami County?

For Miami County, start with the Peru site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Miami County fire and EMS frequencies encrypted?

None of the 11 conventional frequencies listed for Miami County are marked encrypted.

Are Miami County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Miami County are marked encrypted.