About Martin County Fire and EMS Frequencies
Quick answer: Fire dispatch for Martin County: Martin County Fire 155.1300 MHz, narrow FM, CSQ. EMS dispatch for Martin County: Martin County EMS 151.4000 MHz, narrow FM, 131.8 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Martin County Fire talkgroup 21503 (hex 53ff).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Martin County, start with the Bramble site of Indiana Project Hoosier SAFE-T. Its control channels: 858.4375, 859.4375 MHz.
Data updated .
Martin County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County Fire | Fire/EMA – Dispatch (Countywide) | 155.1300 In 154.8900 | CSQ | FMN | KNJJ839 |
| Martin County Fire | Martin County Fire – UHF Link (Countywide) | 453.1625 | FMN | WQAC216 | |
| Martin County Fire | Martin County Fire – UHF Link (Countywide) | 458.1625 | FMN | WQAC216 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Martin County EMS – Dispatch (Countywide) | 151.4000 In 158.7600 | 131.8 PL | FMN | WPZJ605 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Martin County EMS | Martin County EMS – Talk-Around | 155.2050 | 100.0 PL | FMN | KNJJ839 |
Martin County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Martin County Fire | Martin County Fire – Dispatch | 21503 | 53ff | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21504 | 5400 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21505 | 5401 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21506 | 5402 | D |
| Martin County Fire | Martin County Fire – Fire Ground | 21507 | 5403 | D |
| Martin County EMS | Martin County EMS – Dispatch | 21508 | 5404 | D |
| Martin County EMS | Martin County EMS – Operations | 21495 | 53f7 | D |
Radio system sites in Martin County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Martin County
- Bramble
- Burns City
- Cale
- Center
- Crane
- Dover Hill
- Halbert
- Hindostan Falls
- Indian Springs
- Ironton
- Lacy
- Loogootee
- Lost River
- Mitcheltree
- Mount Olive
- Mount Pleasant
- Natchez
- Perry
- Pleasant Valley
- Rusk
- Rutherford
- Scenic Hill
- Shoals
- Shoals Overlook
- South Martin
- Trinity Springs
- Whitfield
- Willow Valley
- Windom
Common questions
What frequency does the fire department use in Martin County?
Fire dispatch channels listed for Martin County: Martin County Fire 155.1300 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Martin County?
EMS dispatch channels listed for Martin County: Martin County EMS 151.4000 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Martin County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Martin County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Martin County?
For Martin County, start with the Bramble site of Indiana Project Hoosier SAFE-T. Its control channels are 858.4375, 859.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Martin County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Martin County are marked encrypted.
Are Martin County fire and EMS talkgroups encrypted?
None of the 7 talkgroups listed for Martin County are marked encrypted.