Skip to content

Marshall County Fire and EMS Frequencies

Marshall County in Indiana has 7 countywide conventional frequencies and 9 countywide talkgroups in our database. Use the list of 15 cities and communities below for local fire departments and EMS agencies.

About Marshall County Fire and EMS Frequencies

Quick answer: Fire dispatch for Marshall County: Marshall County Fire 154.1300 MHz, narrow FM, 85.4 PL. EMS dispatch for Marshall County: Lakeville Lapaz EMS 155.1600 MHz, narrow FM, 74.4 PL; Polk Township EMS 154.4150 MHz, narrow FM, 85.4 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Marshall County Fire talkgroup 10977 (hex 2ae1).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Marshall County, start with the Plymouth site of Indiana Project Hoosier SAFE-T. Its control channels: 857.7125, 858.4625 MHz.

Data updated .

Marshall County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marshall County FireMarshall County Fire – Dispatch (Countywide)154.130085.4 PLFMNWQIX990

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Polk Township FirePolk Township Fire – Fire Ground154.4150FMNWQDZ986
Tippecanoe Township FireTippecanoe Township Fire – Operations152.4350
In 157.6950
051 DPLFMWPUH638

EMS Dispatch

EMS Dispatch frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lakeville Lapaz EMSLakeville Lapaz EMS – Dispatch155.160074.4 PLFMNWQDZ986
Polk Township EMSPolk Township EMS – Dispatch154.415085.4 PLFMNWQDZ986
Walkerton EMSWalkerton EMS – Dispatch155.205071.9 PLFMNWQDZ986

EMS Tactical

EMS Tactical frequencies for Marshall County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tippecanoe Township EMSTippecanoe Township EMS – Old154.5150CSQFMWZH728

Marshall County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Marshall County FireMarshall County Fire – Dispatch109772ae1D
Marshall County FireMarshall County Fire – Fire Ground (County)109782ae2D
Marshall County FireMarshall County Fire – Fire Ground (County)109792ae3D
Marshall County FireMarshall County Fire – Fire Ground (County)109802ae4D
Marshall County FireMarshall County Fire – Fire Ground (County)109812ae5D
Marshall County EMSMarshall County EMS – Dispatch (County)109732addD
Marshall County EMSMarshall County EMS – Operations (County)109742adeD
Marshall County EMSMarshall County EMS – Operations (County)109752adfD
Marshall County EMSMarshall County EMS – Operations (County)109762ae0D

Radio system sites in Marshall County

Program the control channel first; your scanner finds the voice channels from it.

Plymouth · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 40 (hex 28) · NAC 6B1
Control 857.7125, 858.4625
Voice 851.45, 851.95, 852.2125, 852.45, 852.95, 853.95, 857.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Marshall County

Common questions

What frequency does the fire department use in Marshall County?

Fire dispatch channels listed for Marshall County: Marshall County Fire 154.1300 MHz, narrow FM, 85.4 PL.

What frequency does EMS or the ambulance service use in Marshall County?

EMS dispatch channels listed for Marshall County: Lakeville Lapaz EMS 155.1600 MHz, narrow FM, 74.4 PL; Polk Township EMS 154.4150 MHz, narrow FM, 85.4 PL; Walkerton EMS 155.2050 MHz, narrow FM, 71.9 PL.

Do fire departments and EMS use a trunked radio system in Marshall County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 9 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Marshall County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Marshall County?

For Marshall County, start with the Plymouth site of Indiana Project Hoosier SAFE-T. Its control channels are 857.7125, 858.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Marshall County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Marshall County are marked encrypted.

Are Marshall County fire and EMS talkgroups encrypted?

None of the 9 talkgroups listed for Marshall County are marked encrypted.