About Clinton Police Frequencies
Quick answer: Trunked: Indiana Project Hoosier SAFE-T, for example LaPorte County Sheriff talkgroup 12623 (hex 314f).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clinton, start with the INDOC Westville Correctional Center site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 859.7375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
LaPorte County channels that also cover Clinton
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | Dispatch . | 155.0100 In 156.0900 | 244 DPL | FMN | KSA487 |
| Purdue University Police | Purdue University Police – Dispatch | 155.8050 In 153.9950 | 103.5 PL | FMN | KSZ490 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | SWAT | 153.8525 | FMN | WPTF278 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | Westville Police – Base-to-Car (Channel 3) | 154.0625 | FMN | WQKC612 | |
| County Public Safety | Car-to-Car . | 156.2100 | FMN | KSA487 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Public Safety | County Jail | 154.8675 | 132 DPL | FMN | WQBY970 |
| Indiana State Prison | Prison Operations | 155.5800 | NAC 540 | P25 | KRX308 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| LaPorte County Sheriff | LaPorte County Sheriff – Dispatch | 12623 | 314f | D |
| LaPorte County Sheriff | Operations | 12624 | 3150 | D |
| LaPorte County Sheriff | Operations | 12625 | 3151 | D |
| LaPorte County Sheriff | County Jail | 12627 | 3153 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| LaPorte County Sheriff | Metro Drug Task Force | 12640 | 3160 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Clinton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do the police use a trunked radio system in Clinton?
Yes. The county-level systems that cover Clinton are Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Clinton?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clinton?
For Clinton, start with the INDOC Westville Correctional Center site of Indiana Project Hoosier SAFE-T. Its control channels are 859.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.