About LaGrange County Fire and EMS Frequencies
Quick answer: Fire dispatch for LaGrange County: LaGrange County Fire 154.3700 MHz, narrow FM, 91.5 PL. EMS dispatch for LaGrange County: LaGrange County EMS 152.3000 MHz, narrow FM, 91.5 PL; LaGrange County Hospital 155.3250 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example LaGrange County Fire talkgroup 10884 (hex 2a84).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For LaGrange County, start with the Lagrange site of Indiana Project Hoosier SAFE-T. Its control channels: 853.225, 853.425 MHz.
Data updated .
LaGrange County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LaGrange County Fire | Fire/EMS Dispatch | 154.3700 | 91.5 PL | FMN | KTM601 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnson Township Fire | Johnson Township Fire – Fire Ground | 155.6850 | 91.5 PL | FMN | KYX874 |
| Lima Township Fire | Lima Township Fire – Command | 153.8300 | 91.5 PL | FMN | KBF233 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| LaGrange County EMS | LaGrange County EMS – Dispatch | 152.3000 | 91.5 PL | FMN | KJJ415 |
| LaGrange County Hospital | LaGrange County Hospital – Dispatch? | 155.3250 | FMN | KCW658 |
LaGrange County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| LaGrange County Fire | County Fire – East | 10884 | 2a84 | D |
| LaGrange County Fire | County Fire – Central | 10885 | 2a85 | D |
| LaGrange County Fire | County Fire – West | 10886 | 2a86 | D |
| LaGrange County Fire | Fire Paging | 11037 | 2b1d | D |
Radio system sites in LaGrange County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in LaGrange County
- Beatys Beach
- Bloomfield
- Brighton
- Brushy Prairie
- Clay
- Clearspring
- Eddy
- Eden
- Elmira
- Emma
- Gravel Beach
- Greenfield
- Greenfield Mills
- Greenwood
- Hartzel
- Honeyville
- Howe
- Indianola
- Johnson
- LaGrange
- Lakeside Park
- Lakeview
- Lima
- Milford
- Mongo
- Mount Pisgah
- Newbury
- Northwood
- Oak Lodge
- Ontario
- Pashan
- Plato
- Ramblewood
- River Oaks
- Scott
- Seyberts
- Shady Nook
- ShaGet Acres
- Shipshewana
- South Milford
- Springfield
- Star Mill
- Stony Creek
- Stroh
- Tall Timbers
- Timberhurst
- Topeka
- Twin Lakes
- Valentine
- Van Buren
- Webers Landing
- Witmer Manor
- Wolcottville
- Woodland Hills
- Woodland Park
- Woodruff
Common questions
What frequency does the fire department use in LaGrange County?
Fire dispatch channels listed for LaGrange County: LaGrange County Fire 154.3700 MHz, narrow FM, 91.5 PL.
What frequency does EMS or the ambulance service use in LaGrange County?
EMS dispatch channels listed for LaGrange County: LaGrange County EMS 152.3000 MHz, narrow FM, 91.5 PL; LaGrange County Hospital 155.3250 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in LaGrange County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in LaGrange County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in LaGrange County?
For LaGrange County, start with the Lagrange site of Indiana Project Hoosier SAFE-T. Its control channels are 853.225, 853.425 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are LaGrange County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for LaGrange County are marked encrypted.
Are LaGrange County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for LaGrange County are marked encrypted.