Skip to content

Decker Fire and EMS Frequencies

Decker in Knox County, Indiana has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Vincennes (Indiana Project Hoosier SAFE-T), about 10 miles away.

About Decker Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Decker: County Fire Dispatch 155.8350 MHz, narrow FM, 123.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Decker Fire talkgroup 21443 (hex 53c3).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 1 talkgroup; Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Decker, start with the Vincennes site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 859.2625, 859.7625 MHz.

Data updated .

Decker trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Decker FireJohnson Township/Decker Fire2144353c3D

Knox County channels that also cover Decker

Fire Dispatch

Fire Dispatch frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire DispatchCounty Fire Dispatch155.8350
In 158.8800
123.0 PLFMNKMK373

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harrison Twp FireHarrison Twp Fire154.0850
In 159.1200
FMNWQKZ407
Johnson Township FireJohnson Township Fire460.4000
In 465.4000
FMNKNEZ467
Knox County Fire800Mhz Backup Repeater854.9875
In 809.9875
156.7 PLFMNWPLQ822
Palmyra Township FirePalmyra Township Fire154.3250FMNKNGQ574
Vigo Township FireVigo Township Fire154.3850
In 158.8950
FMNWZM743

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Knox County FireCounty Fire Multigroup2143453baD
Knox County FireFire/EMS Backup (Site Trunking Mode)2145953d3D
Knox County FireHarrison Township Fire2144253c2D
Knox County FirePalmyra Township Fire2146153d5D
Knox County FireSteen Township Fire2146253d6D
Knox County FireVincennes Township Fire2146553d9D
Knox County FireVigo Township Fire2146653daD
Knox County FireWashington Township Fire2146953ddD
Knox County EMSGood Samaritan EMS2144553c5D
Knox County HospitalGood Samaritan Hospital2144653c6D

Nearest trunked radio sites

Distances are measured from the center of Decker.

Vincennes · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 67 (hex 43) · NAC 6B6 · about 10 mi away
Control 859.2625, 859.7625
Voice 851.9875, 852.45, 852.65, 853.3625, 857.6625, 858.2625, 858.7625
Princeton · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 69 (hex 45) · NAC 6B6 · about 11 mi away
Control 853.85, 858.9875
Voice 851.0375, 853.6, 858.7125
Petersburg · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 22 (hex 16) · NAC 6B2 · about 13 mi away
Control 852.975, 853.475
Voice 851.475, 851.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Decker?

We do not have a fire dispatch channel listed specifically for Decker. The county-level fire dispatch channels in the same county: County Fire Dispatch 155.8350 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Decker?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Decker?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Decker?

For Decker, start with the Vincennes site of Indiana Project Hoosier SAFE-T. Its control channels are 859.2625, 859.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Decker fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Decker are marked encrypted.