About Jefferson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Jefferson County: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL. EMS dispatch for Jefferson County: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Jefferson County Fire talkgroup 21406 (hex 539e).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jefferson County, start with the Madison site of Indiana Project Hoosier SAFE-T. Its control channels: 857.9625, 858.5125, 858.9625 MHz.
Data updated .
Jefferson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | Jefferson County Fire – Dispatch | 159.2850 In 154.0100 | 91.5 PL | FMN | WPQI713 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County EMS | Jefferson County EMS – Dispatch | 160.1100 | 210.7 PL | FMN | WNDE698 |
Jefferson County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jefferson County Fire | Jefferson County Fire – Dispatch (County) | 21406 | 539e | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21407 | 539f | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21408 | 53a0 | D |
| Jefferson County Fire | Jefferson County Fire – Fire Ground (County) | 21409 | 53a1 | D |
| Jefferson County Fire | Jefferson County Fire – Administration (County) | 21405 | 539d | D |
| Jefferson County EMS | Jefferson County EMS – Dispatch (County) | 21399 | 5397 | D |
| Jefferson County EMS | Jefferson County EMS – Operations (County) | 21400 | 5398 | D |
| Jefferson County EMS | Jefferson County EMS – Administration (County) | 21398 | 5396 | D |
Radio system sites in Jefferson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Jefferson County
Common questions
What frequency does the fire department use in Jefferson County?
Fire dispatch channels listed for Jefferson County: Jefferson County Fire 159.2850 MHz, narrow FM, 91.5 PL.
What frequency does EMS or the ambulance service use in Jefferson County?
EMS dispatch channels listed for Jefferson County: Jefferson County EMS 160.1100 MHz, narrow FM, 210.7 PL.
Do fire departments and EMS use a trunked radio system in Jefferson County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jefferson County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jefferson County?
For Jefferson County, start with the Madison site of Indiana Project Hoosier SAFE-T. Its control channels are 857.9625, 858.5125, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jefferson County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Jefferson County are marked encrypted.
Are Jefferson County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Jefferson County are marked encrypted.