About Jasper County Fire and EMS Frequencies
Quick answer: Fire dispatch for Jasper County: Jasper County Fire/EMS 154.1450 MHz, narrow FM, 162.2 PL. EMS dispatch for Jasper County: Jasper County Fire/EMS 154.3850 MHz, narrow FM, 162 DPL (expired). Trunked: Indiana Project Hoosier SAFE-T, for example Jasper County Fire talkgroup 10794 (hex 2a2a).
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jasper County, start with the Monon site of Indiana Project Hoosier SAFE-T. Its control channels: 858.9625, 859.9625 MHz.
- 2 entries are marked expired, so they may no longer be in use.
Data updated .
Jasper County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Fire/EMS | Jasper County Fire/EMS – Dispatch | 154.1450 | 162.2 PL | FMN | WQKE933 |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Demotte | 453.3875 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Demotte | 453.5875 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Remington | 453.7250 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Rensellaer | 458.1500 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Demotte | 458.3875 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Demotte | 458.5875 | FMN | WQKE933 | |
| Jasper County Fire/EMS | Jasper County Fire/EMS – UHF Link – Wheatfield | 458.7250 | 712 DPL | FMN | WQKE933 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Fire/EMS | Keener Township Fire | 151.3025 | 162.2 PL | FMN | KXT934 |
| Jasper County Fire/EMS Expired: Expired 9/11 | Remington Fire | 154.2050 | FMN | KBW211 | |
| Jasper County Fire/EMS | Wheatfield Fire | 453.3500 In 458.3500 | 141.3 PL | FMN | WQGC379 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jasper County Fire/EMS Expired: Expired 8/23; in use 4/25 | Prompt EMS – Dispatch | 154.3850 In 151.3025 | 162 DPL | FMN | WPMK785 |
Jasper County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jasper County Fire | County Fire Dispatch | 10794 | 2a2a | D |
| Jasper County Fire | County Fire Operations | 10793 | 2a29 | D |
| Jasper County EMS | County EMS Dispatch | 10792 | 2a28 | D |
Radio system sites in Jasper County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Jasper County
Common questions
What frequency does the fire department use in Jasper County?
Fire dispatch channels listed for Jasper County: Jasper County Fire/EMS 154.1450 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Jasper County?
EMS dispatch channels listed for Jasper County: Jasper County Fire/EMS 154.3850 MHz, narrow FM, 162 DPL (expired).
Do fire departments and EMS use a trunked radio system in Jasper County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jasper County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jasper County?
For Jasper County, start with the Monon site of Indiana Project Hoosier SAFE-T. Its control channels are 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jasper County fire and EMS frequencies encrypted?
None of the 12 conventional frequencies listed for Jasper County are marked encrypted.
Are Jasper County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Jasper County are marked encrypted.