Skip to content

Jackson County Police Frequencies

Jackson County in Indiana has 2 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 21 cities and communities below for local police departments.

About Jackson County Police Frequencies

Quick answer: Trunked: Indiana Project Hoosier SAFE-T, for example Jackson County Sheriff talkgroup 21385 (hex 5389).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Jackson County, start with the Seymour site of Indiana Project Hoosier SAFE-T. Its control channels: 853.9125 MHz.

Data updated .

Jackson County conventional frequencies

Jails & Corrections

Jails & Corrections frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County SheriffJail154.7400
In 158.7300
FMNWPQJ422
Jackson County SheriffJuvenile Detention Center155.6250
In 158.9700
043 DPLFMNWPQJ422

Jackson County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Jackson County SheriffJackson County Sheriff – Dispatch213855389D
Jackson County SheriffSheriff Operations21386538aD
Jackson County SheriffSheriff Operations21387538bD

Radio system sites in Jackson County

Program the control channel first; your scanner finds the voice channels from it.

Seymour · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 32 (hex 20) · NAC 6B9
Control 853.9125
Voice 851.4625, 852.4125, 852.8875, 853.3625, 856.7125
Brownstown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 49 (hex 31) · NAC 6B4
Control 854.3875
Voice 851.225, 852.9375, 853.0375, 853.2875, 854.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Jackson County

Common questions

Do the police use a trunked radio system in Jackson County?

Yes. Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Jackson County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Jackson County?

For Jackson County, start with the Seymour site of Indiana Project Hoosier SAFE-T. Its control channels are 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Jackson County police frequencies encrypted?

None of the 2 conventional frequencies listed for Jackson County are marked encrypted.

Are Jackson County police talkgroups encrypted?

None of the 3 talkgroups listed for Jackson County are marked encrypted.