Skip to content

Hendricks County Fire and EMS Frequencies

Hendricks County in Indiana has 5 countywide conventional frequencies and 16 countywide talkgroups in our database. Use the list of 42 cities and communities below for local fire departments and EMS agencies.

About Hendricks County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hendricks County: Fire/EMS/Emergency Management 153.8900 MHz, narrow FM, 162 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Hendricks County Fire talkgroup 10359 (hex 2877).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hendricks County, start with the Hendricks Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels: 853.4125, 853.8875 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Hendricks County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hendricks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Paging – South153.8900162 DPLFMNKSP309
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Paging – North154.1300162 DPLFMNKSP309

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hendricks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementEmergency Management155.9625
In 159.2925
023 DPLFMNKSP309
Fire/EMS/Emergency Management BackupFire/EMS/Emergency Management – Operations158.8350FMNKSP309
Fire/EMS/Emergency Management BackupFire/EMS/Emergency Management – Operations159.2925FMNKSP309

Hendricks County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Hendricks County FireHendricks County Fire – Dispatch (County)103592877D
Hendricks County FireInterop (County)10350286eD
Hendricks County FireHendricks County Fire – Common (County)103602878D
Hendricks County FireHendricks County Fire – Operations (County)103612879D
Hendricks County FireHendricks County Fire – Operations (County)10362287aD
Hendricks County FireHendricks County Fire – Operations (County)10363287bD
Hendricks County FireHendricks County Fire – Operations (County)10364287cD
Hendricks County FireHendricks County Fire – Operations (County)10365287dD
Hendricks County FireHendricks County Fire – Operations (County)10366287eD
Hendricks County FireHendricks County Fire – Operations (County)10367287fD
Hendricks County FireHendricks County Fire – Operations (County)103682880D
Hendricks County FireHendricks County Fire – Training (County)103692881D
Hendricks County FireHendricks County Fire – Administration (County)103542872D
Hendricks County HospitalEMS-to-Hendricks Regional Brownsburg ER103732885D
2 encrypted talkgroups (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Hendricks County HospitalEMS-to-Hendricks Regional ER103702882D Encrypted
Hendricks County HospitalEMS-to-IU Health West ER103722884D Encrypted

Radio system sites in Hendricks County

Program the control channel first; your scanner finds the voice channels from it.

Hendricks Co Simulcast · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 4 (hex 4) · NAC 6B7
Control 853.4125, 853.8875
Voice 851.15, 851.6125, 852.1375, 852.3875, 852.5375, 853.4, 854.1875, 855.7125, 855.9625
INDOC Plainfield · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 80 (hex 50) · NAC 6B0
Control 771.53125, 771.78125
Voice 769.53125, 770.33125, 771.13125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hendricks County

Common questions

What frequency does the fire department use in Hendricks County?

Fire dispatch channels listed for Hendricks County: Fire/EMS/Emergency Management 153.8900 MHz, narrow FM, 162 DPL.

Do fire departments and EMS use a trunked radio system in Hendricks County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 16 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hendricks County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hendricks County?

For Hendricks County, start with the Hendricks Co Simulcast site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4125, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hendricks County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Hendricks County are marked encrypted.

Are Hendricks County fire and EMS talkgroups encrypted?

2 of the 16 talkgroups listed for Hendricks County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.