Skip to content

Hancock County Fire and EMS Frequencies

Hancock County in Indiana has 8 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Hancock County Fire and EMS Frequencies

Quick answer: Fire dispatch for Hancock County: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Hancock County Fire talkgroup 10332 (hex 285c).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hancock County, start with the Wilkinson site of Indiana Project Hoosier SAFE-T. Its control channels: 854.2375, 854.3875 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Hancock County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch155.8200203.5 PLFMNWNSX425

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Fire Ground154.1450146.2 PLFMNWNKX220
Hancock County FireHancock County Fire – Fire Ground154.4000FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground155.1000FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground156.0150FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground156.2250FMNWPGA634
Hancock County FireHancock County Fire – Fire Ground159.1350FMNWPGA634
Sugar Creek Twp. FireSugar Creek Twp. Fire (Channel 2)154.4000FMNKNJG725

Hancock County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Control (County)10332285cD
Hancock County FireHancock County Fire – Dispatch (County) (Multicast on 155.82)10382288eD
Hancock County FireHancock County Fire – Fire Ground (County)103262856D
Hancock County FireHancock County Fire – Fire Ground (County)103272857D
Hancock County FireHancock County Fire – Fire Ground (County)103282858D
Hancock County FireHancock County Fire – Fire Ground (County)103292859D
Hancock County FireHancock County Fire – Fire Ground (County)10330285aD
1 encrypted talkgroup (cannot be monitored)
Indiana Project Hoosier SAFE-T encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Marshal (County)10331285bD Encrypted

Radio system sites in Hancock County

Program the control channel first; your scanner finds the voice channels from it.

Wilkinson · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 73 (hex 49) · NAC 6B3
Control 854.2375, 854.3875
Voice 851.375, 852.5875, 853.05, 854.0125, 854.4375
Greenfield · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 74 (hex 4A) · NAC 6B4
Control 854.2625, 854.4375
Voice 852.45, 853.05, 853.3, 853.575, 853.825, 854.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Hancock County

Common questions

What frequency does the fire department use in Hancock County?

Fire dispatch channels listed for Hancock County: Hancock County Fire 155.8200 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Hancock County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hancock County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hancock County?

For Hancock County, start with the Wilkinson site of Indiana Project Hoosier SAFE-T. Its control channels are 854.2375, 854.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hancock County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Hancock County are marked encrypted.

Are Hancock County fire and EMS talkgroups encrypted?

1 of the 8 talkgroups listed for Hancock County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.