About Gibson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Gibson County: Gibson County Fire 154.9800 MHz, narrow FM, CSQ. Trunked: Indiana Project Hoosier SAFE-T, for example Gibson County Fire talkgroup 21237 (hex 52f5).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gibson County, start with the Princeton site of Indiana Project Hoosier SAFE-T. Its control channels: 853.85, 858.9875 MHz.
Data updated .
Gibson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gibson County Fire | Gibson County Fire – Dispatch | 154.9800 | CSQ | FMN | WPEY885 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gibson County Fire | Gibson County Fire – Mutual Aid/Operations | 154.2650 | 91.5 PL | FMN | WNUG308 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gibson County EMS | Gibson County EMS – Operations | 151.4075 In 158.8575 | 91.5 PL | FMN | WQWQ245 |
Gibson County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gibson County Fire | Gibson County Fire – Dispatch | 21237 | 52f5 | D |
| Gibson County Fire | Gibson County Fire – Fire Ground | 21238 | 52f6 | D |
| Gibson County Fire | Gibson County Fire – Fire Ground | 21239 | 52f7 | D |
| Gibson County Fire | Gibson County Fire – Fire Ground | 21240 | 52f8 | D |
| Gibson County Fire | Gibson County Fire – Fire Ground | 21241 | 52f9 | D |
| Gibson County Fire | Gibson County Fire – Fire Ground | 21242 | 52fa | D |
| Gibson County EMS | Gibson County EMS – Dispatch | 21235 | 52f3 | D |
| Gibson County EMS | Gibson County EMS – Operations | 21236 | 52f4 | D |
Radio system sites in Gibson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Gibson County
- Baldwin Heights
- Barton
- Buckskin
- Buena Vista
- Calamity
- Center
- Columbia
- Crawleyville
- Dongola
- Douglas
- Durham
- East Mount Carmel
- Fort Branch
- Francisco
- Gray Junction
- Gudgel
- Haubstadt
- Hazleton
- Hickory Ridge
- Johnson
- Kings Station
- Lyles Station
- Mackey
- Montgomery
- Mount Olympus
- Mounts
- Northbrook Hills
- Oak Hill
- Oakland City
- Owensville
- Patoka
- Port Gibson
- Princeton
- Saint James
- Skelton
- Snake Run
- Somerville
- Union
- Wabash
- Warrenton
- Washington
- Wheeling
- White River
Common questions
What frequency does the fire department use in Gibson County?
Fire dispatch channels listed for Gibson County: Gibson County Fire 154.9800 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Gibson County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gibson County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gibson County?
For Gibson County, start with the Princeton site of Indiana Project Hoosier SAFE-T. Its control channels are 853.85, 858.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gibson County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Gibson County are marked encrypted.
Are Gibson County fire and EMS talkgroups encrypted?
None of the 8 talkgroups listed for Gibson County are marked encrypted.