Skip to content

Fountain County Fire and EMS Frequencies

Fountain County in Indiana has 4 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 28 cities and communities below for local fire departments and EMS agencies.

About Fountain County Fire and EMS Frequencies

Quick answer: Fire dispatch for Fountain County: Emergency Management/Fire/EMS 154.4300 MHz, narrow FM, 107.2 PL. EMS dispatch for Fountain County: Emergency Management/Fire/EMS 155.9550 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Fountain County EMS talkgroup 10257 (hex 2811).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fountain County, start with the Covington site of Indiana Project Hoosier SAFE-T. Its control channels: 853.3625, 853.9 MHz.

Data updated .

Fountain County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Fountain County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Dispatch154.4300
In 159.0525
107.2 PLFMNWPLS514

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fountain County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Tactical Channel153.9500FMNWPKY952
Emergency Management/Fire/EMSEmergency Management Operations453.1750
In 458.1750
114.8 PLFMNWQIW312

EMS Dispatch

EMS Dispatch frequencies for Fountain County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Emergency Management/Fire/EMSEmergency Management/Fire/EMS – Dispatch155.9550146.2 PLFMNKNDK594

Fountain County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Fountain County EMSFountain County EMS – Dispatch102572811D
Fountain County EMSFountain County EMS – Tactical Channel102582812D

Radio system sites in Fountain County

Program the control channel first; your scanner finds the voice channels from it.

Covington · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 26 (hex 1A) · NAC 6B6
Control 853.3625, 853.9
Voice 851.3625, 852.3625, 852.8625, 855.2375
Attica · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 67 (hex 43) · NAC 6B8
Control 853.4375, 853.9375
Voice 851.4125, 851.9125, 852.9125, 856.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Fountain County

Common questions

What frequency does the fire department use in Fountain County?

Fire dispatch channels listed for Fountain County: Emergency Management/Fire/EMS 154.4300 MHz, narrow FM, 107.2 PL.

What frequency does EMS or the ambulance service use in Fountain County?

EMS dispatch channels listed for Fountain County: Emergency Management/Fire/EMS 155.9550 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Fountain County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fountain County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fountain County?

For Fountain County, start with the Covington site of Indiana Project Hoosier SAFE-T. Its control channels are 853.3625, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Fountain County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Fountain County are marked encrypted.

Are Fountain County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Fountain County are marked encrypted.