Skip to content

Floyd County Fire and EMS Frequencies

Floyd County in Indiana has 3 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About Floyd County Fire and EMS Frequencies

Quick answer: Fire dispatch for Floyd County: Floyd County Government 154.1300 MHz, narrow FM, 151.4 PL. EMS dispatch for Floyd County: AmeriPro EMS 452.3000 MHz, DMR, CC 1 · TG 1 · SL 1. Trunked: Indiana Project Hoosier SAFE-T, for example Floyd County Fire talkgroup 21188 (hex 52c4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Floyd County, start with the Floyds Knob site of Indiana Project Hoosier SAFE-T. Its control channels: 853.4, 853.9, 854.1625 MHz.

Data updated .

Floyd County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County GovernmentFloyd County Government – Dispatch (Channel 1)154.1300
In 159.3000
151.4 PLFMNWNHV234

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Floyd County GovernmentFloyd County Government – Tactical Channel (Channel 6)154.2350FMNKNBD591

EMS Dispatch

EMS Dispatch frequencies for Floyd County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AmeriPro EMSAmeriPro EMS – Dispatch452.3000
In 457.3000
CC 1 · TG 1 · SL 1DMRKNEJ305

Floyd County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Floyd County FireFloyd County Fire – Dispatch (County)2118852c4D
Floyd County FireFloyd County Fire – Operations (County)2118952c5D
Floyd County FireFloyd County Fire – Operations (County)2119052c6D
Floyd County FireFloyd County Fire – Operations (County)2119152c7D
Floyd County FireFloyd County Fire – Operations (County)2119252c8D
Floyd County EMSFloyd County EMS – Dispatch (County)2119352c9D
Floyd County EMSAmeriPro EMS2120252d2D

Radio system sites in Floyd County

Program the control channel first; your scanner finds the voice channels from it.

Floyds Knob · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 34 (hex 22) · NAC 6B3
Control 853.4, 853.9, 854.1625, 854.4375
Voice 851.4, 852.4, 852.9
Georgetown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 82 (hex 52)
Control 772.60625, 772.85625
Voice 769.11875, 772.10625, 772.35625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Floyd County

Common questions

What frequency does the fire department use in Floyd County?

Fire dispatch channels listed for Floyd County: Floyd County Government 154.1300 MHz, narrow FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Floyd County?

EMS dispatch channels listed for Floyd County: AmeriPro EMS 452.3000 MHz, DMR, CC 1 · TG 1 · SL 1.

Do fire departments and EMS use a trunked radio system in Floyd County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Floyd County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Floyd County?

For Floyd County, start with the Floyds Knob site of Indiana Project Hoosier SAFE-T. Its control channels are 853.4, 853.9, 854.1625, 854.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Floyd County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Floyd County are marked encrypted.

Are Floyd County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Floyd County are marked encrypted.