Skip to content

Delaware County Fire and EMS Frequencies

Delaware County in Indiana has 10 countywide conventional frequencies and 10 countywide talkgroups in our database. Use the list of 18 cities and communities below for local fire departments and EMS agencies.

About Delaware County Fire and EMS Frequencies

Quick answer: Fire dispatch for Delaware County: Delaware County Fire/EMS 154.1900 MHz, narrow FM, 146.2 PL; Salem Township Fire 154.1900 MHz, narrow FM, 146.2 PL. EMS dispatch for Delaware County: Delaware County Fire/EMS 155.2200 MHz, narrow FM, 146.2 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Delaware County Fire talkgroup 10174 (hex 27be).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Delaware County, start with the Muncie site of Indiana Project Hoosier SAFE-T. Its control channels: 852.95, 853.2625 MHz.

Data updated .

Delaware County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County Fire/EMSDelaware County Fire/EMS – Dispatch154.1900
In 159.0300
146.2 PLFMNWPLS714
Salem Township FireFire/EMS Dispatch154.1900146.2 PLFMNWQAW929

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Center TownshipCenter Township – Fire Ground153.7700FMWPSF575
Delaware County Fire/EMSCounty Emergency Services Dispatch155.4075
In 159.2925
FMNKAY939
Delaware County Fire/EMSAlternate Fire155.5950
In 159.0300
146.2 PLFMNKSB276
Hamilton Township Volunteer Fire DeptTactical Channel #2153.9500FMNWNLC230
Liberty Township Vol Fire DeptTactical Channel #3154.1300FMNKDK401
Mount Pleasant Township FireYorktown/Mt. Pleasant Twp. Fire154.2350FMNWPFV780

EMS Dispatch

EMS Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County Fire/EMSDelaware County Fire/EMS – Dispatch155.2200146.2 PLFMNKAY939

EMS Tactical

EMS Tactical frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
IU Health Ball Memorial HospitalMedical Response Teams Paging460.3250
In 465.3250
FMNWPTS589

Delaware County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Delaware County FireDelaware County Fire – Dispatch (Countywide)1017427beD
Delaware Muncie (18)Delaware Muncie (18) – Dispatch1015627acD
Delaware County FireDelaware County Fire – Fire Ground (Countywide)1017527bfD
Delaware County FireDelaware County Fire – Fire Ground (Countywide)1017627c0D
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015727adD
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015827aeD
Delaware Muncie (18)Delaware Muncie (18) – Fire Ground1015927afD
Delaware County EMSDelaware County EMS – Dispatch (Countywide)1014427a0D
Delaware County EMSDelaware County EMS – Tactical Channel (Countywide)1014627a2D
Delaware County HospitalDelaware County Hospital – IHERN (Countywide)1014527a1D

Radio system sites in Delaware County

Program the control channel first; your scanner finds the voice channels from it.

Muncie · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 75 (hex 4B) · NAC 6B5
Control 852.95, 853.2625
Voice 851.0125, 851.05, 851.175, 851.225, 851.3125, 851.6, 851.95, 852.1, 852.6375, 853.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Delaware County

Common questions

What frequency does the fire department use in Delaware County?

Fire dispatch channels listed for Delaware County: Delaware County Fire/EMS 154.1900 MHz, narrow FM, 146.2 PL; Salem Township Fire 154.1900 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Delaware County?

EMS dispatch channels listed for Delaware County: Delaware County Fire/EMS 155.2200 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Delaware County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Delaware County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Delaware County?

For Delaware County, start with the Muncie site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Delaware County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Delaware County are marked encrypted.

Are Delaware County fire and EMS talkgroups encrypted?

None of the 10 talkgroups listed for Delaware County are marked encrypted.