About DeKalb County Fire and EMS Frequencies
Quick answer: Fire dispatch for DeKalb County: DeKalb County Fire 154.3550 MHz, narrow FM, 77.0 PL. EMS dispatch for DeKalb County: Parkview/DeKalb Memorial Hospital (Auburn) 155.2050 MHz, narrow FM, 192.8 PL (expired). Trunked: Indiana Project Hoosier SAFE-T, for example DeKalb County Fire talkgroup 10114 (hex 2782).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For DeKalb County, start with the Auburn site of Indiana Project Hoosier SAFE-T. Its control channels: 853.65, 853.8875 MHz.
- 2 entries are marked expired, so they may no longer be in use.
Data updated .
DeKalb County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire | DeKalb County Fire – Dispatch | 154.3550 | 77.0 PL | FMN | KNET483 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County Fire | DeKalb County Fire – Operations with Noble County | 154.2200 | 118.8 PL | FMN | KNET483 |
| DeKalb County Fire | DeKalb County Fire – Fire Ground | 154.4000 | 77.0 PL | FMN | WPLS913 |
| DeKalb County Fire | DeKalb County Fire – Operations with Steuben County | 154.4300 | 77.0 PL | FMN | KNET483 |
| DeKalb County Fire | Emergency Management | 158.7750 | FMN | KBL753 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Parkview/DeKalb Memorial Hospital (Auburn) Expired: Expired 8/24 | Parkview Samaritan Helicopter | 155.2050 | 192.8 PL | FMN | WNQA202 |
| Parkview/DeKalb Memorial Hospital (Auburn) Expired: Expired 8/24 | Parkview/DeKalb Memorial Hospital (Auburn) – Dispatch | 155.4000 | 82.5 PL | FMN | WNQA202 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| DeKalb County EMS | DeKalb County EMS – Car-to-Car/Ch | 155.2800 | FMN | — |
DeKalb County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| DeKalb County Fire | Fire Paging | 10114 | 2782 | D |
| DeKalb County Fire | DeKalb County Fire – Dispatch | 10115 | 2783 | D |
| DeKalb County Hospital | Operations 1 EMS to Parkview DeKalb Hospital | 10125 | 278d | D |
Radio system sites in DeKalb County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in DeKalb County
- Altona
- Artic
- Ashley
- Auburn
- Auburn Junction
- Butler
- Butler Center
- Cedar
- Concord
- Corunna
- Fairfield
- Fairfield Center
- Franklin
- Garrett
- Grant
- Hamilton
- Hopewell
- Jackson
- Keyser
- Moore
- New Era
- Newville
- Orangeville
- Richland
- Saint Joe
- Saint Johns
- Sedan
- Smithfield
- Spencer
- Spencerville
- Stafford
- Stafford Center
- Summit
- Taylor Corner
- Troy
- Union
- Waterloo
- Wilmington
Common questions
What frequency does the fire department use in DeKalb County?
Fire dispatch channels listed for DeKalb County: DeKalb County Fire 154.3550 MHz, narrow FM, 77.0 PL.
What frequency does EMS or the ambulance service use in DeKalb County?
EMS dispatch channels listed for DeKalb County: Parkview/DeKalb Memorial Hospital (Auburn) 155.2050 MHz, narrow FM, 192.8 PL (expired).
Do fire departments and EMS use a trunked radio system in DeKalb County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in DeKalb County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in DeKalb County?
For DeKalb County, start with the Auburn site of Indiana Project Hoosier SAFE-T. Its control channels are 853.65, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are DeKalb County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for DeKalb County are marked encrypted.
Are DeKalb County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for DeKalb County are marked encrypted.