About Crawford County Fire and EMS Frequencies
Quick answer: Fire dispatch for Crawford County: Crawford County Fire 155.8350 MHz, narrow FM, 151.4 PL. EMS dispatch for Crawford County: Crawford County EMS 151.4300 MHz, narrow FM, 100.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Crawford County Fire talkgroup 21092 (hex 5264).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Crawford County, start with the Marengo site of Indiana Project Hoosier SAFE-T. Its control channels: 853.875 MHz.
Data updated .
Crawford County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crawford County Fire | Crawford County Fire – Dispatch | 155.8350 In 158.8200 | 151.4 PL | FMN | WNBS210 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crawford County Fire | Crawford County Fire – Operations | 151.1900 In 153.8900 | 151.4 PL | FMN | WNPM542 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crawford County EMS | Crawford County EMS – Tone-Outs/Dispatch | 151.4300 In 155.1150 | 100.0 PL | FMN | WQTS764 |
Crawford County trunked talkgroups
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Crawford County Fire | Crawford County Fire – Dispatch | 21092 | 5264 | D |
| Crawford County Fire | Crawford County Fire – Fire Ground | 21093 | 5265 | D |
| Crawford County Fire | Crawford County Fire – Fire Ground | 21094 | 5266 | D |
| Crawford County Fire | Crawford County Fire – Fire Ground | 21095 | 5267 | D |
| Crawford County Fire | Crawford County Fire – Fire Ground | 21096 | 5268 | D |
| Crawford County EMS | Crawford County EMS – Dispatch | 21104 | 5270 | D |
Radio system sites in Crawford County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Crawford County
Common questions
What frequency does the fire department use in Crawford County?
Fire dispatch channels listed for Crawford County: Crawford County Fire 155.8350 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Crawford County?
EMS dispatch channels listed for Crawford County: Crawford County EMS 151.4300 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Crawford County?
Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Crawford County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Crawford County?
For Crawford County, start with the Marengo site of Indiana Project Hoosier SAFE-T. Its control channels are 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Crawford County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Crawford County are marked encrypted.
Are Crawford County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Crawford County are marked encrypted.