Skip to content

Forest Police Frequencies

We do not have frequencies listed specifically for Forest in Clinton County, Indiana yet. Countywide channels for Clinton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Geetingsville (Indiana Project Hoosier SAFE-T), about 9 miles away.

About Forest Police Frequencies

Quick answer: County-level dispatch that covers Forest: Clinton County Sheriff 153.2900 MHz, narrow FM, 365 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Clinton County Sheriff talkgroup 10107 (hex 277b).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Forest, start with the Geetingsville site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 852.95, 853.95 MHz.

Data updated .

Clinton County channels that also cover Forest

Dispatch

Dispatch frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County SheriffSheriff/Fire – Dispatch (Rebroadcast of SAFE-T)153.2900365 DPLFMNWPPB519
Clinton County Sheriff BackupClinton County Sheriff – Dispatch155.4150
In 156.1350
365 DPLFMNKY6425

Tactical

Tactical frequencies for Clinton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinton County Sheriff BackupClinton County Sheriff – Tactical Channel156.2400
In 159.1050
FMNKDC973
Clinton County Sheriff BackupMobile Extenders158.9100FMNKY6425

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Clinton County SheriffClinton County Sheriff – Dispatch (Sheriff)10107277bD
Clinton County SheriffInvestigations (County)10106277aD
Clinton County SheriffTalk-Around (County)10109277dD
Clinton County SheriffJail Operations125633113D

Nearest trunked radio sites

Distances are measured from the center of Forest.

Geetingsville · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 25 (hex 19) · NAC 6B5 · about 9 mi away
Control 852.95, 853.95
Voice 851.45, 851.95, 852.45, 856.7125
Kokomo · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 55 (hex 37) · NAC 6B7 · about 12 mi away
Control 853.8875, 853.9125
Voice 851.8625, 853.3875, 853.4125, 854.3375
Simulcast · Howard County IN Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 734 · about 12 mi away
Control 851.2, 851.3375, 852.125, 852.325, 852.6, 852.85, 853.2125, 853.2875, 854.0625, 854.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Forest?

We do not have a dispatch channel listed specifically for Forest. The county sheriff's dispatch channels in the same county: Clinton County Sheriff 153.2900 MHz, narrow FM, 365 DPL.

Do the police use a trunked radio system in Forest?

Yes. The county-level systems that cover Forest are Law-enforcement talkgroups are listed for Indiana Project Hoosier SAFE-T: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Forest?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Forest?

For Forest, start with the Geetingsville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.95, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.