Skip to content

Clark County Fire and EMS Frequencies

Clark County in Indiana has 8 countywide conventional frequencies and 10 countywide talkgroups in our database. Use the list of 53 cities and communities below for local fire departments and EMS agencies.

About Clark County Fire and EMS Frequencies

Quick answer: Fire dispatch for Clark County: Fire/EMS/EMA 154.4300 MHz, narrow FM, 110.9 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Clark County Fire talkgroup 21066 (hex 524a).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clark County, start with the Henryville site of Indiana Project Hoosier SAFE-T. Its control channels: 854.0375, 854.2375, 854.4125 MHz.

Data updated .

Clark County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMAFire/EMS/EMA – Dispatch154.4300
In 159.3600
110.9 PLFMNWRXF775

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMADisaster Response Operations153.8300110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.1450110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.2050110.9 PLFMNWRXF775
Fire/EMS/EMAFire/EMS/EMA – Fire Ground154.2800110.9 PLFMNWRXF775
Fire/EMS/EMAMonroe Township Fire
Patched to SAFE-T TG 10-FIRE-3
155.0850103.5 PLFMNKTO566
Fire/EMS/EMANew Washington Fireground/Operations155.3850
In 151.1075
156.7 PLFMNWQAN793

EMS Tactical

EMS Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/EMAFire/EMS/EMA – Tactical Channel156.1875
In 154.0925
186.2 PLFMNWPXM793

Clark County trunked talkgroups

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Clark County FireCentral Dispatch21066524aD
Clark County FireCentral Dispatch21067524bD
Clark County FireCentral Tactical210575241D
Clark County FireClark County Fire – Fire Ground210625246D
Clark County FireClark County Fire – Fire Ground210785256D
Clark County FireClark County Fire – Fire Ground210795257D
Clark County FireClark County Fire – Fire Ground210805258D
Clark County FireClark County Fire – Fire Ground210815259D
Clark County FireClark County Fire – Fire Ground21082525aD
Clark County EMSClark County EMS – Tactical Channel (County)210745252D

Radio system sites in Clark County

Program the control channel first; your scanner finds the voice channels from it.

Henryville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 33 (hex 21) · NAC 6B3
Control 854.0375, 854.2375, 854.4125, 857.7125
Voice 851.425, 851.925, 852.925, 853.425, 853.925
Charlestown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 40 (hex 28) · NAC 6B0
Control 851.9625, 852.45, 852.975, 854.4625
Voice 851.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Clark County

Common questions

What frequency does the fire department use in Clark County?

Fire dispatch channels listed for Clark County: Fire/EMS/EMA 154.4300 MHz, narrow FM, 110.9 PL.

Do fire departments and EMS use a trunked radio system in Clark County?

Yes. Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clark County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clark County?

For Clark County, start with the Henryville site of Indiana Project Hoosier SAFE-T. Its control channels are 854.0375, 854.2375, 854.4125, 857.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Clark County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Clark County are marked encrypted.

Are Clark County fire and EMS talkgroups encrypted?

None of the 10 talkgroups listed for Clark County are marked encrypted.