About Phillips Police Frequencies
Quick answer: County-level dispatch that covers Phillips: White County Sheriff 155.5500 MHz, narrow FM, 146.2 PL (old).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
White County channels that also cover Phillips
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| White County Sheriff Old | White County Sheriff – Dispatch | 155.5500 In 153.8750 | 146.2 PL | FMN | KOM938 |
| White County Sheriff Old | White County Sheriff – Dispatch | 158.8275 In 153.8975 | 411 DPL | FMN | WQUS464 |
| White County Sheriff | White County Sheriff – Dispatch | 158.8275 In 153.8975 | CC 1 · TG * · SL 1 | DMR Encrypted | WQUS464 |
Nearest trunked radio sites
Distances are measured from the center of Phillips.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Phillips?
We do not have a dispatch channel listed specifically for Phillips. The county sheriff's dispatch channels in the same county: White County Sheriff 155.5500 MHz, narrow FM, 146.2 PL (old).
What scanner do I need to listen to police in Phillips?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Phillips?
For Phillips, start with the Phillipstown site of STARCOM21 Statewide Illinois. Its control channels are 852.325, 852.85, 853.375 MHz. Program a control channel first; the scanner finds the voice channels from it.