Skip to content

Stark County Fire and EMS Frequencies

Stark County in Illinois has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Stark County Fire and EMS Frequencies

Quick answer: EMS dispatch for Stark County: Stark County Government 151.4975 MHz, narrow FM, 136.5 PL. Trunked: STARCOM21 Statewide Illinois, for example Stark County EMS talkgroup 6748 (hex 1a5c).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stark County, start with the Toulon site of STARCOM21 Statewide Illinois. Its control channels: 853.2375 MHz.

Data updated .

Stark County conventional frequencies

EMS Dispatch

EMS Dispatch frequencies for Stark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stark County GovernmentStark County Government – Dispatch151.4975
In 156.0375
136.5 PLFMNWSBV820

EMS Tactical

EMS Tactical frequencies for Stark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stark County Ambulance Service (SCAS)Stark County Ambulance Service (SCAS) – Portables/Extenders464.9125FMNWPQC438

Stark County trunked talkgroups

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Stark County EMSStark County Ambulance (Channel 2)67481a5cT

Radio system sites in Stark County

Program the control channel first; your scanner finds the voice channels from it.

Toulon · STARCOM21 Statewide Illinois
RFSS 2 · Site 66 (hex 42) · NAC 140
Control 853.2375
Voice 851.6125, 852.0375, 853.0375, 853.2875, 853.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Stark County

Common questions

What frequency does EMS or the ambulance service use in Stark County?

EMS dispatch channels listed for Stark County: Stark County Government 151.4975 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Stark County?

Yes. Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stark County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stark County?

For Stark County, start with the Toulon site of STARCOM21 Statewide Illinois. Its control channels are 853.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stark County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Stark County are marked encrypted.

Are Stark County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Stark County are marked encrypted.