Skip to content

Mark Fire and EMS Frequencies

We do not have frequencies listed specifically for Mark in Putnam County, Illinois yet. Countywide channels for Putnam County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Granville (Clearview) (Putnam County), about 3 miles away.

About Mark Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mark: Hennipin Fire 155.2200 MHz, narrow FM, no tone; Putnam County Fire 150.9950 MHz, narrow FM, 100.0 PL. Trunked: Putnam County, for example Putnam County Fire talkgroup 2010 (hex 7da).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Putnam County: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.

Data updated .

Putnam County channels that also cover Mark

Fire Dispatch

Fire Dispatch frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hennipin FireHennipin Fire – Operations155.2200FMNKNBY450
Putnam County FireFire/EMS/ESDA – Paging / Operations150.9950
In 153.8750
100.0 PLFMNWPXH347

Putnam County

Putnam County talkgroups
AgencyDescriptionTalkgroupHexMode
Putnam County FireFire and EMS Dispatch (dispatch only – no responses)20107daT

Nearest trunked radio sites

Distances are measured from the center of Mark.

Granville (Clearview) · Putnam County
Site 3 (hex 3) · about 3 mi away
Voice 453.525
Spring Valley (Fox Run) · Putnam County
Site 2 (hex 2) · about 3 mi away
Voice 453.3375
Hennepin · Putnam County
Site 1 (hex 1) · about 5 mi away
Voice 453.1625

Common questions

What frequency does the fire department use in Mark?

We do not have a fire dispatch channel listed specifically for Mark. The county-level fire dispatch channels in the same county: Hennipin Fire 155.2200 MHz, narrow FM, no tone; Putnam County Fire 150.9950 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Mark?

Yes. The county-level systems that cover Mark are Fire and EMS talkgroups are listed for Putnam County: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mark?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.