Skip to content

Pike County Police Frequencies

Pike County in Illinois has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 34 cities and communities below for local police departments.

About Pike County Police Frequencies

Quick answer: Dispatch for Pike County: Sheriff / E911 Fire/EMS 154.7850 MHz, narrow FM, 114.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pike County conventional frequencies

Dispatch

Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sheriff / E911 Fire/EMSSheriff / Countywide Law – Dispatch {123.0 in}154.7850
In 159.1800
114.8 PLFMNKNGF366
Sheriff / E911 Fire/EMS911/Sheriff – Voting System (to Law, Alpha or Bravo)453.3750
In 458.3750
114.8 PLFMNKIB550

Jails & Corrections

Jails & Corrections frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pittsfield Work Camp [K-17-???]Operations453.4250
In 458.4250
127.3 PLFMNWQRC881

Radio system sites in Pike County

Program the control channel first; your scanner finds the voice channels from it.

New Canton · STARCOM21 Statewide Illinois
RFSS 2 · Site 13 (hex D) · NAC 140
Control 851.8375, 852.3625
Voice 852.8875, 853.4125, 853.9875, 856.9125
Pittsfield · STARCOM21 Statewide Illinois
RFSS 2 · Site 19 (hex 13) · NAC 149
Control 852.3375, 852.8625, 853.3875
Voice 851.8125, 853.9625, 855.3625
Pleasant Hill · STARCOM21 Statewide Illinois
RFSS 2 · Site 35 (hex 23) · NAC 14A
Control 851.8625, 852.3875, 852.9125
Voice 851.3375, 853.4375, 856.3375
Nebo · STARCOM21 Statewide Illinois
RFSS 3 · Site 38 (hex 26) · NAC 14E
Control 851.9625, 852.4875
Voice 851.4375, 853.9
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Pike County

Common questions

What frequency do the police use in Pike County?

Dispatch channels listed for Pike County: Sheriff / E911 Fire/EMS 154.7850 MHz, narrow FM, 114.8 PL.

What is the sheriff's dispatch frequency in Pike County?

Sheriff / E911 Fire/EMS 154.7850 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to police in Pike County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pike County?

For Pike County, start with the New Canton site of STARCOM21 Statewide Illinois. Its control channels are 851.8375, 852.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Pike County police frequencies encrypted?

None of the 3 conventional frequencies listed for Pike County are marked encrypted.