About Bethany Fire and EMS Frequencies
Quick answer: Fire dispatch for Bethany: Bethany Fire 159.1200 MHz, narrow FM, 118.8 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Bethany conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bethany Fire | Bethany Fire – Dispatch | 159.1200 In 154.0025 | 118.8 PL | FMN | WQMJ224 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bethany Fire | Bethany Fire – Fire Ground | 154.3700 | FMN | WPCE933 |
Moultrie County channels that also cover Bethany
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dalton City / Dora Township Fire | Dalton City / Dora Township Fire – Local | 154.1600 | FMN | WQOQ330 | |
| Moultrie County Fire | Moultrie County Fire – Countywide Dispatch (D506 in; Sullivan) | 151.4000 In 158.8500 | 503 DPL | FMN | WQFP723 |
| Moultrie County Fire | Moultrie County Fire – Dispatch | 154.1300 | CSQ | FMN | WPGR807 |
Nearest trunked radio sites
Distances are measured from the center of Bethany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bethany?
Fire dispatch channels listed for Bethany: Bethany Fire 159.1200 MHz, narrow FM, 118.8 PL.
What scanner do I need to listen to fire and EMS in Bethany?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Bethany?
For Bethany, start with the Decatur - South site of STARCOM21 Statewide Illinois. Its control channels are 851.9625, 852.4875, 853.325 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bethany fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Bethany are marked encrypted.