Skip to content

Salem Fire and EMS Frequencies

Salem in Marion County, Illinois has 3 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Salem (Marion County ETSB/911), about 2 miles away.

About Salem Fire and EMS Frequencies

Quick answer: Fire dispatch for Salem: Salem Fire 151.1675 MHz, narrow FM, 624 DPL. County-level ems dispatch that covers Salem: Marion County EMS 151.1900 MHz, narrow FM, 311 DPL. Trunked: Marion County ETSB/911, for example Salem Fire talkgroup 1128 (hex 468).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48, DMR), which needs a scanner that decodes those modes.
  • Trunked radio systems that carry fire and EMS traffic here: Marion County ETSB/911: 1 talkgroup; Marion County ETSB/911: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Salem conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Salem
AgencyDescriptionFrequency (MHz)ToneModeFCC
Salem FireSalem Fire – Operations151.1675
In 156.0075
624 DPLFMNKSF600
Salem FireSalem Fire – Mobile Extenders173.2625NXDN48KSF600

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Salem
AgencyDescriptionFrequency (MHz)ToneModeFCC
Salem FireSalem Fire – Fire Ground154.4000179.9 PLFMNKSF600

Salem trunked talkgroups

Marion County ETSB/911

Marion County ETSB/911 talkgroups
AgencyDescriptionTalkgroupHexMode
Salem FireSalem Fire Protection District1128468D

Marion County channels that also cover Salem

Fire Dispatch

Fire Dispatch frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Marion County FireFire/EMS/FR – Countywide Dispatch (except Centralia)151.2200165 DPLFMNWQNS227

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kinmundy-Alma FireFireground <b>154.2500CSQFMNWRXV274
Marion County FireMarion County Fire – Mutual Aid – County154.2950CSQFMNWPMJ601

EMS Dispatch

EMS Dispatch frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lifestar Ambulance (Centralia)Lifestar Ambulance (Centralia) – Dispatch152.4425
In 157.7025
CC 1 · TG 1000 · SL 2DMR EncryptedWQZI495
Marion County EMSMarion County EMS – Dispatch (United One, Lifestar)151.1900311 DPLFMNWQLE555

Hospitals & Medical

Hospitals & Medical frequencies for Marion County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Salem Township HospitalPatient Reports155.3400107.2 PLFMNKNIF215
SSM St. Mary's Hospital (Centralia)Patient Reports155.3400127.3 PLFMNWQYY531

Marion County ETSB/911

Marion County ETSB/911 talkgroups
AgencyDescriptionTalkgroupHexMode
Marion County FireKinmundy-Alma Fire Protection District1125465D
Marion County FireFarina Fire Protection District1126466D
Marion County FireXenia-Orchardville Fire Protection District113146bD

Nearest trunked radio sites

Distances are measured from the center of Salem.

Salem · Marion County ETSB/911
Site 1 (hex 1) · about 2 mi away
Voice 856.9875, 857.9875, 858.9875
Centralia · STARCOM21 Statewide Illinois
RFSS 3 · Site 14 (hex E) · NAC 14D · about 10 mi away
Control 770.16875, 773.34375
Voice 769.21875, 774.09375, 855.6625, 860.8125
Dix · STARCOM21 Statewide Illinois
RFSS 3 · Site 31 (hex 1F) · NAC 14C · about 13 mi away
Control 851.925, 852.45
Voice 851.4, 852.975, 853.8625, 858.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Salem?

Fire dispatch channels listed for Salem: Salem Fire 151.1675 MHz, narrow FM, 624 DPL.

What frequency does EMS or the ambulance service use in Salem?

We do not have a EMS dispatch channel listed specifically for Salem. The county-level EMS dispatch channels in the same county: Marion County EMS 151.1900 MHz, narrow FM, 311 DPL.

Do fire departments and EMS use a trunked radio system in Salem?

Yes. Fire and EMS talkgroups are listed for Marion County ETSB/911: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Salem?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Salem?

For Salem, start with the Centralia site of STARCOM21 Statewide Illinois. Its control channels are 770.16875, 773.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Salem fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Salem are marked encrypted.

Are Salem fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Salem are marked encrypted.