Skip to content

Iroquois County Fire and EMS Frequencies

Iroquois County in Illinois has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 35 cities and communities below for local fire departments and EMS agencies.

About Iroquois County Fire and EMS Frequencies

Quick answer: Fire dispatch for Iroquois County: I-COM Fire 151.0625 MHz, narrow FM, 192.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Iroquois County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
I-COM FireI-COM Fire – Paging /Dispatch – Countywide151.0625
In 156.0225
192.8 PLFMNWQCD920
I-COM FireI-COM Fire – Link to Remote 154.4 Towers (7 tones)458.3750110.9 PLFMNWQCR953

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
I-COM FireI-COM Fire – Chit-Chat153.8150FMNWQCR953
I-COM FireI-COM Fire – Chit-Chat153.9650FMNWQCR953
I-COM FireI-COM Fire – Operations154.4000
In 159.4425
192.8 PLFMNWQCR953

Hospitals & Medical

Hospitals & Medical frequencies for Iroquois County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Iroquois Memorial Hospital (Watseka)Patient Reports155.3400192.8 PLFMNWSAL625

Radio system sites in Iroquois County

Program the control channel first; your scanner finds the voice channels from it.

Ashkum · STARCOM21 Statewide Illinois
RFSS 2 · Site 50 (hex 32) · NAC 144
Control 851.8625, 853.325, 856.2125
Voice 851.3375, 851.4375, 853.8875, 860.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Iroquois County

Common questions

What frequency does the fire department use in Iroquois County?

Fire dispatch channels listed for Iroquois County: I-COM Fire 151.0625 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Iroquois County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Iroquois County?

For Iroquois County, start with the Ashkum site of STARCOM21 Statewide Illinois. Its control channels are 851.8625, 853.325, 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Iroquois County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Iroquois County are marked encrypted.