Skip to content

McLeansboro Fire and EMS Frequencies

McLeansboro in Hamilton County, Illinois has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Thompsonville (STARCOM21 Statewide Illinois), about 14 miles away.

About McLeansboro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers McLeansboro: Hamilton County Fire 154.0700 MHz, narrow FM, no tone. County-level ems dispatch that covers McLeansboro: Hamilton County EMS 154.2125 MHz, narrow FM, 74.4 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

McLeansboro conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McLeansboro
AgencyDescriptionFrequency (MHz)ToneModeFCC
McLeansboro FireMcLeansboro Fire – Local154.2800FMNWQHA802

Hamilton County channels that also cover McLeansboro

Fire Dispatch

Fire Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County FireHamilton County Fire – Dispatch (McLeansboro/Dahlgren)154.0700FMNWQHA802

EMS Dispatch

EMS Dispatch frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton County EMSHamilton County EMS – Dispatch154.212574.4 PLFMNKNIC505

Hospitals & Medical

Hospitals & Medical frequencies for Hamilton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamilton Memorial Hospital (McLeansboro)Patients Reports155.3400FMNWNCD568

Nearest trunked radio sites

Distances are measured from the center of McLeansboro.

Thompsonville · STARCOM21 Statewide Illinois
RFSS 3 · Site 45 (hex 2D) · NAC 14D · about 14 mi away
Control 851.975, 853.4
Voice 852.875, 853.8875, 858.3375
Carmi · STARCOM21 Statewide Illinois
RFSS 3 · Site 8 (hex 8) · NAC 14A · about 18 mi away
Control 851.875, 852.4, 852.925
Voice 851.35, 853.45
Ina · STARCOM21 Statewide Illinois
RFSS 3 · Site 4 (hex 4) · NAC 14B · about 20 mi away
Control 851.95, 852.475, 853.3125
Voice 851.425, 853.8875, 857.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in McLeansboro?

We do not have a fire dispatch channel listed specifically for McLeansboro. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.0700 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in McLeansboro?

We do not have a EMS dispatch channel listed specifically for McLeansboro. The county-level EMS dispatch channels in the same county: Hamilton County EMS 154.2125 MHz, narrow FM, 74.4 PL.

What scanner do I need to listen to fire and EMS in McLeansboro?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in McLeansboro?

For McLeansboro, start with the Thompsonville site of STARCOM21 Statewide Illinois. Its control channels are 851.975, 853.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McLeansboro fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for McLeansboro are marked encrypted.