Farina also extends into Marion County.
About Farina Fire and EMS Frequencies
Quick answer: Fire dispatch for Farina: Farina Fire 154.4300 MHz, narrow FM, no tone. Trunked: STARCOM21 Statewide Illinois, for example Fayette County Fire talkgroup 8481 (hex 2121).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Farina, start with the Mason site of STARCOM21 Statewide Illinois, about 13 miles away. Its control channels: 851.4125, 852.9875, 853.875 MHz.
Data updated .
Farina conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Farina Fire | Farina Fire – Dispatch | 154.4300 | FMN | WQOH898 |
Fayette County channels that also cover Farina
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Fayette County Fire – Tone-Outs / Dispatch | 155.4225 In 151.1075 | 743 DPL | FMN | WRTF884 |
| Saint Peter Fire | Saint Peter Fire – Dispatch | 154.3250 | FMN | WQFP676 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Fayette County Fire – Fire Ground – Countywide (Channel 2) | 153.9725 | 743 DPL | FMN | WRWD807 |
| Fayette County Fire | Fayette County Fire – Fire Ground – Countywide (Channel 1) | 158.9250 | 743 DPL | FMN | WRWD807 |
| Saint Elmo Fire | Saint Elmo Fire – Fire Ground | 154.3250 | FMN | KFX224 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| SBL Fayette County Hospital (Vandalia) | Patient Reports | 155.3400 | 123.0 PL | FMN | WRXE825 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fayette County Fire Unconfirmed | County Fire | 8481 | 2121 | D |
Nearest trunked radio sites
Distances are measured from the center of Farina.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Farina?
Fire dispatch channels listed for Farina: Farina Fire 154.4300 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Farina?
Yes. The county-level systems that cover Farina are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Farina?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Farina?
For Farina, start with the Mason site of STARCOM21 Statewide Illinois. Its control channels are 851.4125, 852.9875, 853.875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Farina fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Farina are marked encrypted.