Skip to content

Arthur Fire and EMS Frequencies

Arthur in Douglas County, Illinois has 4 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Pesotum (STARCOM21 Statewide Illinois), about 17 miles away.

Arthur also extends into Moultrie County.

About Arthur Fire and EMS Frequencies

Quick answer: Fire dispatch for Arthur: Arthur Fire 154.1300 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Arthur: Arrow Medical Services Emergency Communications (AMSEC) 151.3475 MHz, narrow FM, CSQ. Trunked: STARCOM21 Statewide Illinois, for example Douglas County Fire talkgroup 5936 (hex 1730).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Arthur, start with the Pesotum site of STARCOM21 Statewide Illinois, about 17 miles away. Its control channels: 852.4125, 852.9375, 854.5625 MHz.

Data updated .

Arthur conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Arthur
AgencyDescriptionFrequency (MHz)ToneModeFCC
Arthur FireArthur Fire – Operations – Local154.1300
In 153.7700
123.0 PLFMNWPGR807
Arthur FireArthur Fire – Dispatch154.1300CSQFMNWPGR807
Arthur FireArthur Fire – Dispatch154.1300
In 159.2625
123.0 PLFMNWPGR807

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Arthur
AgencyDescriptionFrequency (MHz)ToneModeFCC
Arthur FireArthur Fire – Fire Ground159.4500146.2 PLFMN—

Douglas County channels that also cover Arthur

Fire Dispatch

Fire Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Douglas County FireDouglas County Fire – Dispatch (for Broadlands-Champaign Co)154.1300CSQFMN—
Douglas County FireDouglas County Fire – Countywide Dispatch154.1300123.0 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Douglas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Arrow Medical Services Emergency Communications (AMSEC)Arrow Medical Services Emergency Communications (AMSEC) – Paging – Future (Tuscola)151.3475CSQFMNWPTH211

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Douglas County FireDouglas County Fire – Dispatch59361730D

Nearest trunked radio sites

Distances are measured from the center of Arthur.

Pesotum · STARCOM21 Statewide Illinois
RFSS 2 · Site 6 (hex 6) · NAC 14D · about 17 mi away
Control 852.4125, 852.9375, 854.5625
Voice 851.3625, 853.4625
Mattoon · STARCOM21 Statewide Illinois
RFSS 2 · Site 34 (hex 22) · NAC 149 · about 17 mi away
Control 851.9125, 852.4375, 852.9625
Voice 851.3875, 853.4875, 855.1875, 858.7375, 858.8625, 859.7375, 860.7375
Macon Co Simulcast · STARCOM21 Statewide Illinois
RFSS 2 · Site 1 (hex 1) · NAC 14B · about 27 mi away
Control 851.8375, 852.3625, 852.8875
Voice 851.3125, 855.2375, 856.2875, 859.2625, 860.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Arthur?

Fire dispatch channels listed for Arthur: Arthur Fire 154.1300 MHz, narrow FM, 123.0 PL.

What frequency does EMS or the ambulance service use in Arthur?

We do not have a EMS dispatch channel listed specifically for Arthur. The county-level EMS dispatch channels in the same county: Arrow Medical Services Emergency Communications (AMSEC) 151.3475 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Arthur?

Yes. The county-level systems that cover Arthur are Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Arthur?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Arthur?

For Arthur, start with the Pesotum site of STARCOM21 Statewide Illinois. Its control channels are 852.4125, 852.9375, 854.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Arthur fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Arthur are marked encrypted.