Skip to content

DeKalb County Fire and EMS Frequencies

DeKalb County in Illinois has 6 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 22 cities and communities below for local fire departments and EMS agencies.

About DeKalb County Fire and EMS Frequencies

Quick answer: Fire dispatch for DeKalb County: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL. Trunked: DeKalb County Public Safety, for example DeKalb County Fire talkgroup 28 (hex 1c).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For DeKalb County, start with the Simulcast site of DeKalb County Public Safety. Its control channels: 769.83125, 770.30625, 771.50625 MHz.

Data updated .

DeKalb County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County FireDeKalb County Fire – Dispatch – Countywide (Channel 1)153.4850
In 159.0150
192.8 PLFMNWPJP732
DeKalb County FireDeKalb County Fire – Backup (Channel 2) / Law – Backup to SC21154.8600
In 155.9700
141.3 PLFMNWPXU646

Fire Ground / Tactical

Fire Ground / Tactical frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
DeKalb County FireDeKalb County Fire – Main/Fireground; Outdoor Warning Siren System154.0700CSQFMNKAS657

Hospitals & Medical

Hospitals & Medical frequencies for DeKalb County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kishwaukee Community Hospital (DeKalb)Patient Reports155.340088.5 PLFMNWRVU491
Kishwaukee Community Hospital (DeKalb)Patient Reports463.0000
In 468.0000
103.5 PLFMNWQCJ679
Valley West Community Hospital (Sandwich)Patient Reports155.340091.5 PLFMNWPRF621

DeKalb County trunked talkgroups

DeKalb County Public Safety

DeKalb County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
DeKalb County FireDeKalb County Fire – Dispatch – Patch (of 153.485)281cT
DeKalb County FireDeKalb County Fire – County Fire 2 Patch/Law291dT
DeKalb County FireIFERN Patch164a4T

Radio system sites in DeKalb County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · DeKalb County Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 890
Control 769.83125, 770.30625, 771.50625, 771.83125, 772.10625
Voice 772.43125
DeKalb - City · STARCOM21 Statewide Illinois
RFSS 1 · Site 47 (hex 2F) · NAC 144
Control 851.55, 851.8, 852.6
Voice 851.2, 854.3875, 854.9875, 856.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in DeKalb County

Common questions

What frequency does the fire department use in DeKalb County?

Fire dispatch channels listed for DeKalb County: DeKalb County Fire 153.4850 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in DeKalb County?

Yes. Fire and EMS talkgroups are listed for DeKalb County Public Safety: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in DeKalb County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in DeKalb County?

For DeKalb County, start with the Simulcast site of DeKalb County Public Safety. Its control channels are 769.83125, 770.30625, 771.50625, 771.83125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are DeKalb County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for DeKalb County are marked encrypted.

Are DeKalb County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for DeKalb County are marked encrypted.