Skip to content

Cumberland County Fire and EMS Frequencies

Cumberland County in Illinois has 7 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Cumberland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Cumberland County: Cumberland County Fire 151.3100 MHz, DMR, CC 10 · TG 200 · SL 2.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Cumberland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County FireCumberland County Fire – Dispatch /Operations151.3100
In 158.7825
CC 10 · TG 200 · SL 2DMRWROM272
Cumberland County FireCumberland County Fire – Dispatch /Operations151.3100
In 158.7825
CC 10 · TG 800 · SL 2DMRWROM272
Cumberland County FireCumberland County Fire – Dispatch – Greenup, Toledo, Neoga Fire/Ambulance, Siegel, Montrose154.0850
In 154.7100
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Old Dispatch (rare use)155.5200
In 155.1900
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Dispatch / DTMF Siren Activation155.8650
In 154.7100
186.2 PLFMNKSC770
Cumberland County FireCumberland County Fire – Remote Receive Links/Voting System453.1625FMNKSC770

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County Fire911 – Water Tower (Alternate Fire/EMS/Police)159.2100
In 154.6500
FMNKSC770

Radio system sites in Cumberland County

Program the control channel first; your scanner finds the voice channels from it.

Greenup · STARCOM21 Statewide Illinois
RFSS 3 · Site 50 (hex 32) · NAC 141
Control 852.3125, 852.8375, 856.2125
Voice 851.475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Cumberland County

Common questions

What frequency does the fire department use in Cumberland County?

Fire dispatch channels listed for Cumberland County: Cumberland County Fire 151.3100 MHz, DMR, CC 10 · TG 200 · SL 2.

What scanner do I need to listen to fire and EMS in Cumberland County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Cumberland County?

For Cumberland County, start with the Greenup site of STARCOM21 Statewide Illinois. Its control channels are 852.3125, 852.8375, 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Cumberland County fire and EMS frequencies encrypted?

None of the 7 conventional frequencies listed for Cumberland County are marked encrypted.